Viewing a forum - Machinery Talk

Forums | Classifieds (81) | Skins | Language

You are logged in as a guest. ( logon | register )

Machinery Talk
		Message format

Jump to page: < 9982 9983 9984 9985 9986 9987 ... 9988 9989 9990 9991 9992 9993 9994 ... > Forums List -> Machinery Talk

1688 feederhouse floor - Cujo1969 : 9/19/2006 23:13
- Re: 1688 feederhouse floor - JohnW : 9/20/2006 02:22
- Re: 1688 feederhouse floor - Larry NCKS : 9/20/2006 07:26
  - Re: 1688 feederhouse floor - Clapodie : 9/21/2006 09:19
- RE: 1688 feederhouse floor - Tom Jackson : 9/20/2006 10:42
  - RE: 1688 feederhouse floor - dave swia : 9/20/2006 13:00
    - RE: 1688 feederhouse floor - nebfarmer : 9/20/2006 14:35
      - RE: 1688 feederhouse floor - pat-michigan : 9/20/2006 17:27
      - RE: 1688 feederhouse floor - dave swia : 9/20/2006 20:44
        
        Re: 1688 feederhouse floor - Cujo1969 : 9/20/2006 22:51
        RE: 1688 feederhouse floor - nebfarmer : 9/21/2006 07:43
        
        RE: 1688 feederhouse floor - dave swia : 9/21/2006 13:59

Auto header height for corn heads - Dave Cen.Ia : 9/19/2006 23:10
- RE: Auto header height for corn heads - Don NMO : 9/20/2006 00:20
- RE: Auto header height for corn heads - Larry NCKS : 9/20/2006 07:31
- RE: Auto header height for corn heads - tedbear : 9/20/2006 08:00
  - Re: Auto header height for corn heads - loran : 9/20/2006 10:07
    - Re: Auto header height for corn heads - Don NMO : 9/20/2006 13:27
- Re: Auto header height for corn heads - notilltom : 9/20/2006 09:26
- Re: Auto header height for corn heads - ht_man : 9/20/2006 11:27
  - Thanks to all for the responses - Dave Cen.Ia : 9/20/2006 13:51
    - RE: Thanks to all for the responses - ht_man : 9/20/2006 16:31

(OT) Chevy Torque Converter locked up - Merle : 9/19/2006 22:48
- Re: (OT) Chevy Torque Converter locked up - Kooiker : 9/19/2006 23:10
  - Re: (OT) Chevy Torque Converter locked up - pelon : 9/20/2006 00:31
- RE: (OT) Chevy Torque Converter locked up - kansas : 9/20/2006 07:30
- RE: Update (OT) Chevy Torque Converter locked up - Merle : 9/20/2006 18:50

Plowboy on wood blocks - bulldog : 9/19/2006 22:35
- RE: Plowboy on wood blocks - sri : 9/19/2006 23:02
  - RE: Plowboy on wood blocks - plowboy : 9/19/2006 23:42
    - RE: Plowboy on wood blocks - bkandra : 9/20/2006 07:23
- We just put them on a 9610 - BHTN : 9/20/2006 09:20
  - RE: We just put them on a 9610 - bulldog : 9/20/2006 13:43
    - We thought the same thing - BHTN : 9/20/2006 16:40
      - RE: We thought the same thing - bulldog : 9/20/2006 22:21
        
        Re: Plowboy on wood blocks - Rosco : 9/21/2006 00:04
        
        Re: Plowboy on wood blocks - Chad H : 9/21/2006 00:13
        
        Does your book say 10 hours? - BHTN : 9/21/2006 07:51
        RE: Must be a corn thing - plowboy : 9/21/2006 09:40
        
        Re: Plowboy on wood blocks - plowboy : 9/21/2006 00:32
        
        I agree - BHTN : 9/21/2006 07:53
        
        Re: Plowboy on wood blocks - Clapodie : 9/21/2006 09:30
        
        so how do you get the center two in? - dave swia : 9/21/2006 14:02
        
        yes sir, that was what I wondered - dave swia : 9/22/2006 08:01

Adapting 343 snapping head to 3950 pull type chopper - IaAngus : 9/19/2006 22:18
- RE: Adapting 343 snapping head to 3950 pull type chopper - Dingaling : 9/20/2006 04:53
- RE: Adapting 343 snapping head to 3950 pull type chopper - klemish : 9/20/2006 07:52

Combine Feederhouse remover - motram5455 : 9/19/2006 21:28
- Here you go - plowboy : 9/19/2006 21:51
  - ya beat me to it.:-) - Old Pokey : 9/19/2006 22:25
- RE: Combine Feederhouse remover - jdg : 9/19/2006 22:17
- RE: Combine Feederhouse remover - HFR : 9/20/2006 00:59
  - RE: Combine Feederhouse remover - mij : 9/20/2006 15:46
    - Re: Combine Feederhouse remover - Jon Hagen : 9/20/2006 16:17
    - RE: Combine Feederhouse remover - HFR : 9/20/2006 18:29
  - Re: Combine Feederhouse remover - Santa Claas : 9/20/2006 16:49
- I've done it two ways - BHTN : 9/20/2006 17:16
- RE: Combine Feederhouse remover - ozfarmman : 9/20/2006 20:50
  - Re: Combine Feederhouse remover - tx68 : 9/20/2006 21:30

How would you build an auger like this? - John e.c.MI : 9/19/2006 21:25
- RE: How would you build an auger like this? - hillfarmer : 9/19/2006 22:04
- RE: How would you build an auger like this? - Franz© : 9/20/2006 00:52
- RE: How would you build an auger like this? - farmboy99 : 9/20/2006 08:15
- RE: How would you build an auger like this? - mij : 9/20/2006 15:55
- RE: How would you build an auger like this? - sri : 9/20/2006 22:00

4440 oil pressure gauge - John e.c.MI : 9/19/2006 21:07
- Re: 4440 oil pressure gauge - motram5455 : 9/19/2006 21:21
- RE: 4440 oil pressure gauge - NVDave : 9/19/2006 23:05
- Re: 4440 oil pressure gauge - ronm : 9/20/2006 09:32
  - Problem solved. - John e.c.MI : 9/20/2006 15:26

JD 7720 Oil Leak - BRIAN : 9/19/2006 19:37
- RE: JD 7720 Oil Leak - deereman23 : 9/19/2006 20:09
- RE: JD 7720 Oil Leak - agrogers : 9/19/2006 20:23
  - RE: JD 7720 Oil Leak - cotman : 9/19/2006 21:28
- RE: JD 7720 Oil Leak - Filter Drain Hose - Whipper : 9/19/2006 20:59
- RE: JD 7720 Oil Leak - pbutler : 9/19/2006 21:00
- RE: JD 7720 Oil Leak - sri : 9/19/2006 23:09

Farm Science Review Field Demo's? - schwinnj : 9/19/2006 19:15
- RE: Farm Science Review Field Demo's? - IH1586 : 9/19/2006 20:12
  - Re: Farm Science Review Field Demo's? - Ed Winkle : 9/19/2006 20:50

corn reel - gbfarmer : 9/19/2006 19:11
- RE: corn reel - Cletus : 9/20/2006 07:09
- RE: corn reel - Eric SW MO : 9/20/2006 07:24
  - Re: corn reel - crb : 9/20/2006 08:19

Philosophical musings - Ham : 9/19/2006 17:58
- RE: Philosophical musings - Kingbaby : 9/19/2006 20:56

1440 feeder reverser ??? - deewight : 9/19/2006 17:27
- RE: 1440 feeder reverser ??? - SteveOH : 9/19/2006 18:02
  - RE: 1440 feeder reverser ??? - deewight : 9/19/2006 18:58
    - RE: 1440 feeder reverser ??? - SteveOH : 9/20/2006 08:00
- RE: 1440 feeder reverser ??? - Cliff SEIA : 9/19/2006 21:09
  - Re: 1440 feeder reverser ??? - boog : 9/19/2006 22:19

8160 Ford NH - Ernie : 9/19/2006 16:46
- RE: 8160 Ford NH - pudding : 9/19/2006 17:42
  - RE: 8160 Ford NH - Ernie : 9/19/2006 23:55
  - RE: 8160 Ford NH - cho : 9/20/2006 07:58
    - RE: 8160 Ford NH - Gerard : 9/20/2006 11:01
- RE: 8160 Ford NH - Gerard : 9/19/2006 23:44

2388 in crimson clover - wilb : 9/19/2006 16:20
- RE: 2388 in crimson clover - Old Pokey : 9/19/2006 20:55
  - Re: 2388 in crimson clover - wilb : 9/20/2006 00:58
    - Re: 2388 in crimson clover - Old Pokey : 9/20/2006 09:04
      - Re: 2388 in crimson clover - wilb : 9/20/2006 10:49
        
        contact info... - Old Pokey : 9/20/2006 15:10
        
        Re: 2388 in crimson clover - wilb : 9/21/2006 15:12
        
        Maybe....... - Old Pokey : 9/23/2006 00:30

Filler Plates on 9000 series - crb : 9/19/2006 14:58
- Been there done that - BHTN : 9/19/2006 16:09
  - RE: Been there done that - pat-michigan : 9/19/2006 16:36
- RE: Filler Plates on 9000 series - SEK Farmer : 9/19/2006 18:39
- RE: Filler Plates on 9000 series - dave swia : 9/19/2006 19:27
- RE: Filler Plates on 9000 series - cotman : 9/19/2006 20:55

Anyone ever used a Haybuster no-till drill - feelnrite : 9/19/2006 13:41
- Re: Anyone ever used a Haybuster no-till drill - Ed Winkle : 9/19/2006 20:56
  - Re: Anyone ever used a Haybuster no-till drill - ky_guy_justin : 9/19/2006 22:44
    - Re: Anyone ever used a Haybuster no-till drill - feelnrite : 9/20/2006 12:33
    - Re: Anyone ever used a Haybuster no-till drill - Ed Winkle : 9/20/2006 20:20
- Re: Anyone ever used a Haybuster no-till drill - feelnrite : 9/20/2006 08:45

custom cutting rates - Damian : 9/19/2006 13:24
- RE: custom cutting rates - pbutler : 9/19/2006 17:39

Follow-up question on Case tractors - Tom Russell : 9/19/2006 13:08
- RE: Follow-up question on Case tractors - RICK NCMD : 9/19/2006 13:22
  - What Do You Mean? - Marv : 9/19/2006 16:37
    - RE: What Do You Mean? - RICK NCMD : 9/19/2006 23:02
      - Re: Follow-up question on Case tractors - Tom Russell : 9/20/2006 06:13
        
        Re: Follow-up question on Case tractors - RICK NCMD : 9/20/2006 20:05
        
        Re: Follow-up question on Case tractors - pudding : 9/20/2006 20:35
        
        Re: Follow-up question on Case tractors - RICK NCMD : 9/20/2006 23:23
        
        Re: Follow-up question on Case tractors - Tom Russell : 9/21/2006 06:38
- RE: Follow-up question on Case tractors - chris dds : 9/19/2006 16:47
  - Re: Follow-up question on Case tractors - Tom Russell : 9/20/2006 06:16
- RE: Follow-up question on Case tractors - dave morgan : 9/20/2006 00:16
  - Re: Follow-up question on Case tractors - Tom Russell : 9/20/2006 06:23
    - Re: Old Buicks - Redman : 9/20/2006 13:58

Putting in a long run of water line - eddie : 9/19/2006 12:24
- Re: Putting in a long run of water line - Dave EOh : 9/19/2006 13:43
- RE: Putting in a long run of water line - Rex...SC Ne : 9/19/2006 23:37
- RE: Putting in a long run of water line - Franz© : 9/20/2006 00:55
- Re: Putting in a long run of water line - JohnW : 9/20/2006 02:20
- Tiling cost - water line? - iseedit : 9/20/2006 20:53
- Re: Putting in a long run of water line - Hank, in Or : 9/20/2006 21:15

V ripper vs. inline - semnjoe : 9/19/2006 11:29
- RE: V ripper vs. inline - Mark (EC,IN) : 9/19/2006 11:35
  - Re: V ripper vs. inline - crb : 9/19/2006 14:49
    - Re: V ripper vs. inline - schwinnj : 9/19/2006 19:08
      - horsepower per shank? - Rasor Farms : 9/19/2006 21:13
- Re: V ripper vs. inline - Bluffman : 9/19/2006 19:22
- RE: V ripper vs. inline - plowboy : 9/19/2006 21:45
  - I think you mean - Kooiker : 9/19/2006 23:18
    - Now I'm all confused... - Dave Frisch : 9/19/2006 23:25
      - Sorry, my choice of words was poor. - Kooiker : 9/19/2006 23:31
    - RE: I think you mean - plowboy : 9/19/2006 23:46
      - Re: V ripper vs. inline - Pat H : 9/20/2006 09:05

Gleaner F2 tac cluster.. - WorldsWorstFarmer : 9/19/2006 11:05
- RE: Gleaner F2 tac cluster.. - ekeller2 : 9/19/2006 18:29

Denied warranty claim, diesel pickup + chip - Jeffery : 9/19/2006 10:22
- RE: Denied warranty claim, diesel pickup + chip - Russ In Idaho : 9/19/2006 10:51
  - RE: Denied warranty claim, diesel pickup + chip - Jeffery : 9/19/2006 11:08
    - Re: Denied warranty claim, diesel pickup + chip - crb : 9/19/2006 14:52
      - Re: Denied warranty claim, diesel pickup + chip - Bern : 9/19/2006 16:26
  - RE: Denied warranty claim, diesel pickup + chip - combinejockey : 9/19/2006 18:55
- RE: Denied warranty claim, diesel pickup + chip Ford - Ron..NE ILL..10/48 : 9/19/2006 20:30
- RE: Denied warranty claim, diesel pickup + chip - Badger : 9/19/2006 22:27
  - RE: Denied warranty claim, diesel pickup + chip - Ron..NE ILL..10/48 : 9/19/2006 22:44
    - RE: Denied warranty claim, diesel pickup + chip - Badger : 9/19/2006 22:56
      - RE: Denied warranty claim, diesel pickup + chip - Gerard : 9/19/2006 23:48
        
        RE: Denied warranty claim, diesel pickup + chip - Badger : 9/20/2006 00:19
      - Re: Denied warranty claim, diesel pickup + chip - Nathan ECMN : 9/20/2006 00:12
      - RE: Denied warranty claim, diesel pickup + chip - Jay in WA : 9/20/2006 00:18
        
        Have you called GM & BITCHED - Badger : 9/20/2006 00:40
        
        RE: BUY A FORD - crb : 9/20/2006 08:38
        
        Of course then your real problems would begin.......... - Steve : 9/20/2006 11:15
        
        Re: Denied warranty claim, diesel pickup + chip - crb : 9/20/2006 14:54
        
        Re: Denied warranty claim, diesel pickup + chip - Steve : 9/20/2006 15:08
        
        Re: Denied warranty claim, diesel pickup + chip - crb : 9/20/2006 16:11
        
        Re: Denied warranty claim, diesel pickup + chip - Steve : 9/20/2006 18:57
        
        Re: Denied warranty claim, diesel pickup + chip - crb : 9/21/2006 07:59

Vertical unloding capacity? - Matts : 9/19/2006 08:51
- RE: Vertical unloding capacity? - plowboy : 9/19/2006 09:48

5.9 Cummin's knock - Fla Veggie Farmer : 9/19/2006 01:41
- Re: 5.9 Cummin's knock - JohnW : 9/19/2006 02:17
- lift pump noise? - Fighting suburbia NC : 9/19/2006 10:05

Good quality grain bin to put up - Millhouse : 9/18/2006 23:43
- Re: Good quality grain bin to put up - Chad H : 9/19/2006 00:10
- Re: Good quality grain bin to put up - Bluffman : 9/19/2006 00:32
- RE: Good quality grain bin to put up - Oliver1 : 9/19/2006 03:04
- Re: Good quality grain bin to put up - Jay NE Ohio : 9/19/2006 08:16

loewen wood block bearings - bulldog : 9/18/2006 22:54
- Re: loewen wood block bearings - plowboy : 9/19/2006 09:52
  - Agree. - Tim Cooke : 9/19/2006 09:58

IH 1440 combine questions. - K-Stater : 9/18/2006 22:32
- Re: IH 1440 combine questions. - boog : 9/18/2006 23:22
- RE: IH 1440 combine questions. - Delmarbe : 9/19/2006 02:46
- RE: IH 1440 combine questions. - CGinWTN : 9/19/2006 17:35

tmr's which is the best - dairyfarmer : 9/18/2006 22:28
- RE: tmr's which is the best - RICK NCMD : 9/18/2006 23:18
- RE: tmr's which is the best - Chad H : 9/19/2006 00:21
  - RE: tmr's which is the best - RICK NCMD : 9/19/2006 12:54
- RE: tmr's which is the best - Gerard : 9/19/2006 00:45
- RE: tmr's which is the best - Delmarbe : 9/19/2006 02:59
- RE: tmr's which is the best - Jay NE Ohio : 9/19/2006 08:35
- RE: tmr's which is the best - J. Sheehan : 9/19/2006 09:04
- RE: tmr's which is the best - Jason in MI : 9/19/2006 13:13
- Re: tmr's which is the best - Nathan ECMN : 9/19/2006 23:43

power chip - houghta3 : 9/18/2006 21:50
- Re: power chip - censod : 9/19/2006 18:02

Two Top Ruritan Club Fall Festival - Kingbaby : 9/18/2006 21:19
- Re: Two Top Ruritan Club Fall Festival - Ed Winkle : 9/18/2006 21:27
  - Re: Two Top Ruritan Club Fall Festival - Kingbaby : 9/18/2006 21:32
    - Re: i like the 4wd powermaster by elenco - pudding : 9/18/2006 22:31
      - Elenco parts are still available - Fighting suburbia NC : 9/19/2006 10:34
        
        RE: Elenco parts are still available - pudding : 9/19/2006 17:45
    - Re: Two Top Ruritan Club Fall Festival - plowboy : 9/19/2006 09:50
      - Re: Two Top Ruritan Club Fall Festival - Kingbaby : 9/19/2006 10:09
        
        Re: Two Top Ruritan Club Fall Festival - plowboy : 9/19/2006 21:54

Got the new Farm Show Magizine and....... - agboy : 9/18/2006 20:52
- Re: Got the new Farm Show Magizine and....... - JohnW : 9/19/2006 01:47

'02 Ford Explorer Experts, got a question - west illini : 9/18/2006 19:46
- Re: '02 Ford Explorer Experts, got a question - dutch : 9/20/2006 22:16

Great Plains Precision drills w/ singulator plus units - farmerrob : 9/18/2006 19:29
- RE: Great Plains Precision drills w/ singulator plus units - bushton4 : 9/18/2006 21:31
- Re: Great Plains Precision drills w/ singulator plus units - JohnW : 9/19/2006 01:51

turning a tracked grain cart - dkesler : 9/18/2006 19:06
- Re: turning a tracked grain cart - plowboy : 9/18/2006 19:34
  - Re: turning a tracked grain cart - MikeInFrance : 9/19/2006 11:04
    - Re: turning a tracked grain cart - cynic : 9/20/2006 09:20

Tire storage? - Matt neoh : 9/18/2006 18:14
- Re: Tire storage? - Rosco : 9/18/2006 19:47

John Deere 6030 - Greedy Guts : 9/18/2006 17:57
- Re: John Deere 6030 - plowboy : 9/18/2006 19:32
  - Re: John Deere 6030 - Jay NE Ohio : 9/18/2006 20:05
    - Re: John Deere 6030 - plowboy : 9/18/2006 20:15
- RE: John Deere 6030 - Jim Dayton : 9/18/2006 19:57
  - Re: John Deere 6030 - Greedy Guts : 9/19/2006 17:56
    - Re: John Deere 6030 - censod : 9/19/2006 18:12
      - Re: John Deere 6030 - Chad H : 9/19/2006 19:36
        
        Re: John Deere 6030 - Jon Hagen : 9/19/2006 19:39
        
        Re: John Deere 6030 - Chad H : 9/19/2006 19:59
    - Re: John Deere 6030 - WoodySWGA : 9/19/2006 18:15
- RE: Turbo or straight gut? - Redman : 9/21/2006 01:54
  - Re: John Deere 6030 - Jon Hagen : 9/21/2006 21:56

Haylauge Gumming harvester hood - John In Ontario : 9/18/2006 17:22
- RE: Haylauge Gumming harvester hood - RickB : 9/18/2006 18:41
  - RE: Haylauge Gumming harvester hood - russ27 : 9/19/2006 10:56
- Re: Haylauge Gumming harvester hood - McCartman : 9/18/2006 19:10
- RE: Haylauge Gumming harvester hood - Kingbaby : 9/18/2006 20:56
- Re: Haylauge Gumming harvester hood - John In Ontario : 9/18/2006 22:33

For us who did not pay attention the first time--- downsides to the MX series of CIH....... - jakescia : 9/18/2006 17:15
- Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - RAB : 9/18/2006 20:06
  - Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Brandon SWIA : 9/19/2006 05:41
    - Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Chad : 9/19/2006 06:13
      - Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - pudding : 9/19/2006 17:29
- Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Larry NCKS : 9/18/2006 20:33
  - Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Wm. : 9/18/2006 21:54
    - Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Cliff SEIA : 9/18/2006 22:16
    - Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Larry NCKS : 9/19/2006 07:03
      - Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Wm. : 9/19/2006 09:35
        
        Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - cho : 9/19/2006 10:14
        
        Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Larry NCKS : 9/19/2006 10:38
        
        Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Wm. : 9/19/2006 10:45
      - RE: Amen Larry! - cho : 9/19/2006 11:47
        
        RE: I didn't mean great offense. - Wm. : 9/19/2006 12:39
        Rich heres some advice. - Newguy : 9/19/2006 13:12
      - Thanks, Rich . . . Apples to Oranges too! - Larry NCKS : 9/19/2006 13:46
        
        Cliff's MX240 is CAPS also.... - mattfolkman : 9/19/2006 18:54
        
        RE: Cliff's MX240 is CAPS also.... - Larry NCKS : 9/19/2006 22:18
  - Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Mr. Snerdly1 : 9/18/2006 22:20
    - Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Larry NCKS : 9/19/2006 07:00
  - Larry, - Fla Veggie Farmer : 9/19/2006 03:17
    - Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Tom Russell : 9/19/2006 05:25
      - Short memories. - Tim Cooke : 9/19/2006 10:17
        
        RE: Short memories. - combinejockey : 9/19/2006 15:50
        RE: Short memories. - plowboy : 9/19/2006 22:05
    - RE: Larry, - Larry NCKS : 9/19/2006 06:56
      - Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - deeredriver : 9/19/2006 08:13
        
        Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Larry NCKS : 9/19/2006 10:35
        
        Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - RICK NCMD : 9/19/2006 13:16
        
        Nope - Larry NCKS : 9/19/2006 13:49
        
        Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Chad : 9/19/2006 13:59
        
        Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Larry NCKS : 9/19/2006 14:05
        
        Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Robert in NY : 9/19/2006 15:24
        
        Re: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - Larry NCKS : 9/19/2006 22:16
- RE: For us who did not pay attention the first time--- downsides to the MX series of CIH....... - mtbrights : 9/19/2006 14:21

Manitoba Guiness Record Harvest - MTfarm : 9/18/2006 16:54
- RE: Manitoba Guiness Record Harvest - MTfarm : 9/18/2006 18:05
- RE: Manitoba Guiness Record Harvest - oliver459 : 9/18/2006 18:51
  - Re: Manitoba Guiness Record Harvest - feelnrite : 9/18/2006 19:31
  - RE: Manitoba Guiness Record Harvest - MTfarm : 9/18/2006 20:11
    - RE: Manitoba Guiness Record Harvest - Ron..NE ILL..10/48 : 9/18/2006 21:54
  - RE: Manitoba Guiness Record Harvest - F_armer : 9/18/2006 21:53
- What was the Record - Mark (EC,IN) : 9/18/2006 20:54

Anyone know Hoxie Implement, Hoxie, KS......... - jakescia : 9/18/2006 15:12

Small seed box jd 1560 drill - cho : 9/18/2006 14:38
- Re: Small seed box jd 1560 drill - KDD : 9/18/2006 17:10
- Re: Small seed box jd 1560 drill - Jay NE Ohio : 9/18/2006 20:13

You ever notice on unloading augers?? - AdamsGrainCo : 9/18/2006 13:45
- Horsefeathers - Mike SE IL : 9/18/2006 17:22
  - Re: You ever notice on unloading augers?? - Manisoba : 9/18/2006 19:35
  - RE: Horsefeathers (PIC) - Jon Hagen : 9/19/2006 00:22
- RE: You ever notice on unloading augers?? - Jim Dayton : 9/18/2006 20:03
  - Re: You ever notice on unloading augers?? - west illini : 9/18/2006 21:13
    - Re: You ever notice on unloading augers?? - Jim Dayton : 9/18/2006 23:44

OT '97 Ford Taurus - Grizz : 9/18/2006 12:48
- RE: OT '97 Ford Taurus - MTfarm : 9/18/2006 13:09
- RE: OT '97 Ford Taurus - trapper219 : 9/18/2006 15:19

Are grain cleaners worth the hassle? - John e.c.MI : 9/18/2006 12:25
- Re: Are grain cleaners worth the hassle? - E718 : 9/18/2006 12:53
- RE: Are grain cleaners worth the hassle? - Old Pokey : 9/18/2006 15:34
- dont do it - Travis : 9/18/2006 16:44
- There's probably alot of them around - Steve : 9/18/2006 18:02
- RE: Are grain cleaners worth the hassle? - Part Time : 9/18/2006 19:39
- Re: Are grain cleaners worth the hassle? - Jon Hagen : 9/18/2006 21:55
  - RE:Maybe Willie can find a use for it. - Redman : 9/19/2006 00:45
    - Kochia seed for sale... - JohnW : 9/19/2006 02:12
      - RE: Kochia seed for sale... - NVDave : 9/19/2006 06:33
        
        RE: Kochia seed for sale... - Redman : 9/19/2006 17:38
  - Re: Are grain cleaners worth the hassle? - F_armer : 9/19/2006 11:07
- RE: Are grain cleaners worth the hassle? - dave morgan : 9/19/2006 03:00

Micro Trac Grain Flow Sensor - kd78 : 9/18/2006 10:36

Off topic... Need a toy from Europe - EricCKS : 9/18/2006 10:23
- RE: Off topic... Need a toy from Europe - cho : 9/18/2006 10:29
  - RE: Off topic... Need a toy from Europe - EricCKS : 9/18/2006 13:10
    - Re: Off topic... Need a toy from Europe - deeredriver : 9/18/2006 14:00
      - Re: Off topic... Need a toy from Europe - EricCKS : 9/18/2006 15:10
- RE: Off topic... Need a toy from Europe - jcs : 9/18/2006 14:15
  - RE: ya, claas don't allow international buys on the euro site - pudding : 9/18/2006 17:25
- Re: Off topic... Need a toy from Europe - deeredriver : 9/19/2006 08:14

UFT no till dril - cho : 9/18/2006 09:43
- RE: UFT no till dril - farmerrob : 9/18/2006 19:15

Burnt 9760 - bduke : 9/17/2006 23:36
- RE: Burnt 9760 - steven : 9/18/2006 06:15
  - RE: Burnt 9760 - cotman : 9/18/2006 09:03
    - Re: Burnt 9760 - BSchroeder : 9/18/2006 15:03
      - Re: Burnt 9760 - bdpolar : 9/18/2006 19:01
        
        I am sure he is very knowledgeable - Ham : 9/18/2006 19:22
        
        Re: Burnt 9760 - crb : 9/19/2006 08:08

Header stops while in use - Mike SE IL : 9/17/2006 23:16
- RE: Header stops while in use - glensts : 9/17/2006 23:23
- RE: Header stops while in use - rod : 9/17/2006 23:32
- RE: Header stops while in use - Badger : 9/18/2006 00:43
- RE: Header stops while in use - Redman : 9/18/2006 02:42
- RE: Header stops while in use - tedbear : 9/18/2006 05:38
- RE: Header stops while in use - steven : 9/18/2006 06:14
- RE: Header stops while in use - sdPete : 9/18/2006 09:31

Jump to page: < 9982 9983 9984 9985 9986 9987 ... 9988 9989 9990 9991 9992 9993 9994 ... > Forums List -> Machinery Talk
(Search this forum)

(Delete cookies)