Viewing a forum - Machinery Talk

Forums | Classifieds (110) | Skins | Language

You are logged in as a guest. ( logon | register )

Machinery Talk
		Message format

Jump to page: < 9986 9987 9988 9989 9990 9991 ... 9992 9993 9994 9995 9996 9997 9998 ... > Forums List -> Machinery Talk

Harbor frieght grease guns - Badger : 9/22/2006 08:01
- RE: Harbor frieght grease guns - Jeff Outwest : 9/22/2006 09:14
  - About 250 mi - Badger : 9/22/2006 21:44
- Re: Harbor frieght grease guns(PIC) - Jon Hagen : 9/22/2006 10:14
  - jon you are right about that gasket - wcmn : 9/22/2006 11:39
  - Re: Harbor frieght grease guns - Ed Winkle : 9/22/2006 19:25

1688 Header keeps sinking - Loren SE IA : 9/22/2006 05:05
- RE: 1688 Header keeps sinking - trtaylor : 9/22/2006 07:38
- Re: 1688 Header keeps sinking - CW IL : 9/22/2006 10:20
- RE: 1688 Header keeps sinking - dieselade : 9/22/2006 16:40
  - RE: 1688 Header keeps sinking - trtaylor : 9/23/2006 11:03

Kenzie Repower on 9400 - Fla Veggie Farmer : 9/22/2006 02:33
- Re: Kenzie Repower on 9400 - ChrisOH : 9/22/2006 07:29
- Re: Kenzie Repower on 9400 - E718 : 9/22/2006 07:58
  - Re: Kenzie Repower on 9400 - Bluffman : 9/22/2006 09:24
    - Re: Kenzie Repower on 9400 - E718 : 9/22/2006 10:56
- Re: Kenzie Repower on 9400 - KelB : 9/22/2006 08:19
- RE: Kenzie Repower on 9400 - MTfarm : 9/22/2006 11:08
  - RE: Kenzie Repower on 9400 - cotman : 9/22/2006 13:10
    - RE: Kenzie Repower on 9400 - purrin : 9/22/2006 19:52
      - Re: Kenzie Repower on 9400 - dutch : 9/22/2006 21:51
      - I never said anything about running hot, - Fla Veggie Farmer : 9/22/2006 21:53
- Not so much............? - Chad H : 9/22/2006 12:35
  - Cooled EGR - Bern : 9/22/2006 15:45
    - Re: Kenzie Repower on 9400 - dutch : 9/22/2006 21:50
    - RE:Al gore liberal leaning press - Redman : 9/23/2006 23:31
  - RE: Not so much............? - Bluffman : 9/23/2006 00:11
  - Re: Kenzie Repower on 9400 - cynic : 9/23/2006 01:39
    - Re: Kenzie Repower on 9400 - Chad H : 9/23/2006 03:50

B-Line Arrow on Lexion Combine - CAT MAN : 9/21/2006 22:43

gerringhoff on 6220 deere combine - granto : 9/21/2006 22:10
- RE: gerringhoff on 6620 deere combine - granto : 9/21/2006 22:12
  - Re: gerringhoff on 6220 deere combine - cynic : 9/22/2006 00:18
- RE: gerringhoff on 6220 deere combine - cotman : 9/22/2006 02:14
  - RE: gerringhoff on 6220 deere combine - granto : 9/22/2006 08:56

wondering about capacity of IH rotors - School Of Hard Knock : 9/21/2006 20:43
- RE: wondering about capacity of IH rotors - dave morgan : 9/21/2006 21:01
- Re: wondering about capacity of IH rotors - Jon Hagen : 9/21/2006 21:08
  - Re: wondering about capacity of IH rotors - Larry NCKS : 9/21/2006 22:40
    - History page of IHC combines. - billybob : 9/22/2006 04:04
      - Re: wondering about capacity of IH rotors - Jon Hagen : 9/22/2006 12:31
        
        More History - Delmarbe : 9/23/2006 05:11

First impressions - Clarke Machine Rolls - Jason Hinson : 9/21/2006 19:15
- RE: First impressions - Clarke Machine Rolls - AGCOfan : 9/21/2006 19:47

Sunco planter attachments - j_c : 9/21/2006 18:57
- RE: Sunco planter attachments - Barker : 9/22/2006 08:01
  - RE: Sunco planter attachments - j_c : 9/22/2006 11:58
    - RE: Sunco planter attachments - Barker : 9/22/2006 14:07
      - Re: Sunco planter attachments - holdnon : 9/22/2006 14:53

JD 930 flex feeding problems - hwdcne : 9/21/2006 18:38
- RE: JD 930 flex feeding problems - Jim Dayton : 9/21/2006 18:44
  - RE: JD 930 flex feeding problems - dave morgan : 9/21/2006 21:33
  - RE: JD 930 flex feeding problems - hwdcne : 9/21/2006 21:37
    - Re: JD 930 flex feeding problems - ChrisOH : 9/21/2006 21:42
    - RE: JD 930 flex feeding problems - Jim Dayton : 9/21/2006 21:46
    - RE: JD 930 flex feeding problems - dave morgan : 9/21/2006 21:48
- RE: JD 930 flex feeding problems - Unit 2 : 9/21/2006 21:34
  - Re: JD 930 flex feeding problems - chinband : 9/21/2006 22:00
- RE: JD 930 flex feeding problems - Don Kraft : 9/22/2006 00:39
- RE: JD 930 flex feeding problems - sri : 9/22/2006 00:52
  - Re: JD 930 flex feeding problems - hwdcne : 9/22/2006 09:17
- Picures of hose/conduit? - Oliver1 : 9/22/2006 10:13
  - RE: Picures of hose/conduit? - pbutler : 9/22/2006 11:56
    - Re: JD 930 flex feeding problems - Don Kraft : 9/22/2006 13:38
      - Re: JD 930 flex feeding problems - pbutler : 9/22/2006 14:38
      - Re: JD 930 flex feeding problems - sri : 9/22/2006 16:44
- RE: JD 930 flex feeding problems - Jim Dayton : 9/22/2006 18:10

2002 vs. new White planter - semnjoe : 9/21/2006 18:27
- Re: 2002 vs. new White planter - Tom Russell : 9/22/2006 06:18
- Re: 2002 vs. new White planter - agcodealer : 9/22/2006 11:29
  - Edible beans - cho : 9/22/2006 13:15
    - Re: 2002 vs. new White planter - agcodealer : 9/22/2006 15:29
      - Re: 2002 vs. new White planter - pat-michigan : 9/22/2006 20:02
        
        Re: 2002 vs. new White planter - agcodealer : 9/25/2006 17:09
        
        Re: 2002 vs. new White planter - pat-michigan : 9/25/2006 22:37

sloan express - granto : 9/21/2006 18:26
- RE: Depends on what you are looking for..... - Hawken Cougar : 9/21/2006 18:50

Flatbed for small pickup - Hedge tree : 9/21/2006 17:58
- RE: Flatbed for small pickup - russ27 : 9/21/2006 19:52
- Re: Flatbed for small pickup - dutch : 9/21/2006 22:16
- RE: Flatbed for small pickup - Tom Jackson : 9/22/2006 00:49
- RE: Flatbed for small pickup - Justaplain : 9/22/2006 06:52
- RE: Flatbed for small pickup - dabble : 9/22/2006 08:43
- Re: Flatbed for small pickup - dojigger : 9/22/2006 08:49
- Personally , i don't like aluminium trays - Ham : 9/23/2006 00:44

Guy with JD Parts Book - Mark (EC,IN) : 9/21/2006 17:32
- RE: Guy with JD Parts Book - wolfwood00 : 9/21/2006 21:10

used combine advice - leoduncan : 9/21/2006 16:55
- RE: used combine advice - nwiafmr : 9/21/2006 17:23
- Re: used combine advice - Jon Hagen : 9/21/2006 17:28
- RE: used combine advice - Tim KS : 9/21/2006 17:43
- RE: used combine advice - Pete1468 : 9/21/2006 18:10
  - RE: used combine advice - Jon : 9/21/2006 19:40
    - RE: used combine advice - AGCOfan : 9/21/2006 19:50
    - RE: used combine advice - Tim KS : 9/21/2006 20:39
      - RE: used combine advice - Jon : 9/21/2006 23:34
        
        RE: used combine advice - Steve : 9/22/2006 01:10
      - Re: used combine advice - Steve : 9/22/2006 01:13
      - I had one of those 6620s too - dave swia : 9/22/2006 07:56
      - RE: used combine advice - Pete1468 : 9/22/2006 18:52
        
        RE: used combine advice - dave swia : 9/23/2006 08:28
- RE: used combine advice - jdg : 9/21/2006 21:44
- RE: used combine advice - Larry NCKS : 9/21/2006 22:53
- RE: used combine advice - Don Kraft : 9/22/2006 01:05
- Re: used combine advice - Tom Russell : 9/22/2006 06:24
- RE: used combine advice - pbutler : 9/22/2006 08:28
- RE: used combine advice - JHEnt : 9/22/2006 13:30
- RE: used combine advice - Delmarbe : 9/23/2006 06:20

when was the last year they made the cat 35 challenger - wcmn : 9/21/2006 14:39
- RE: when was the last year they made the cat 35 challenger - plowboy : 9/21/2006 17:03
  - Re: when was the last year they made the cat 35 challenger - agcodealer : 9/21/2006 17:16
    - Re: when was the last year they made the cat 35 challenger - cynic : 9/22/2006 00:22
      - AND THE 735 - Newguy : 9/22/2006 18:55

9XXX JD straw chopper - Isaiah : 9/21/2006 12:16
- We pulled ours all the way out. - BHTN : 9/21/2006 12:31
  - RE: We pulled ours all the way out. - dave swia : 9/21/2006 14:09
    - RE: We pulled ours all the way out. - BHTN : 9/21/2006 14:53
- Re: 9XXX JD straw chopper - Maple Leaf : 9/21/2006 21:58
- Re: 9XXX JD straw chopper - Clapodie : 9/22/2006 09:16

Corn Reels - Dirt Rancher : 9/21/2006 11:43
- RE: Off topic but.... - pknoeber : 9/21/2006 12:54
  - RE: Off topic but.... - Dirt Rancher : 9/21/2006 19:42
    - Have a Gustin reel - Panhandler : 9/22/2006 10:34
- RE: Corn Reels - kurt : 9/21/2006 21:34
- Att Von! - dutch : 9/21/2006 22:24
  - RE: Att Von! - Von WC Ohio : 9/22/2006 12:10
    - Re: Corn Reels - dutch : 9/22/2006 22:12
- RE: Corn Reels - jaco : 9/21/2006 23:58
- RE: Corn Reels.....Shoup - Ron..NE ILL..10/48 : 9/22/2006 06:26
- Hawkins Paddle - Cletus : 9/22/2006 08:16

0 - Rich : 9/21/2006 11:26
- RE: Mr. Tom Jackson.........Atv hitch pics - Tom Jackson : 9/22/2006 00:21
- RE: Mr. Rich, job well done - Steve NW WI : 9/22/2006 05:21

New body style on Chevy trucks 07's - Russ In Idaho : 9/21/2006 09:19
- RE: New body style on Chevy trucks 07's - usafarmer : 9/21/2006 10:25
  - Re: New body style on Chevy trucks 07's - Jon Hagen : 9/21/2006 12:22
  - Re: New body style on Chevy trucks 07's - CW IL : 9/21/2006 13:20
  - RE: Ha! - Millhouse : 9/21/2006 15:58
- Don't think it would have made a lot of difference......... - Chad H : 9/21/2006 13:20
  - RE: Don't think it would have made a lot of difference......... - Jon Hagen : 9/21/2006 16:16
    - RE: Don't think it would have made a lot of difference......... - MTfarm : 9/21/2006 17:25
  - RE: Don't think it would have made a lot of difference......... - combinejockey : 9/21/2006 17:55
  - RE HDs not out yet - Steve NW WI : 9/22/2006 05:38
    - Thanks for reassuring my assumptions.......... - Chad H : 9/22/2006 08:58

Row cleaners for strip-tillage - Firecat : 9/21/2006 09:18
- Re: Row cleaners for strip-tillage - midland : 9/21/2006 10:48
  - Re: Row cleaners for strip-tillage - Chad H : 9/21/2006 13:23
    - Re: Row cleaners for strip-tillage - pbutler : 9/21/2006 13:42

Fan for grain dryer - rebuilder : 9/21/2006 07:24
- RE: Fan for grain dryer - NEILJR : 9/21/2006 17:50
- RE: Fan for grain dryer - Don Kraft : 9/22/2006 00:48

ATI Tracks for Combines - CAT MAN : 9/20/2006 23:34
- Re: ATI Tracks for Combines - plowboy : 9/21/2006 00:31
  - Re: ATI Tracks for Combines - CAT MAN : 9/21/2006 22:28

People will sell anything! - EMTfarmer : 9/20/2006 23:19
- I take my shoes and boots off...... - Old Pokey : 9/21/2006 00:10
- Re: People will sell anything! - JohnW : 9/21/2006 02:11

AFS software version - h2oski01 : 9/20/2006 23:18
- Re: AFS software version - Larry NCKS : 9/21/2006 06:09
  - Re: AFS software version - h2oski01 : 9/21/2006 07:51
    - Re: AFS software version - Chad : 9/21/2006 08:08
      - Re: AFS software version - h2oski01 : 9/21/2006 19:54
        
        Re: AFS software version - Chad : 9/22/2006 07:36

Dodge U-Joints failing - JD9400 : 9/20/2006 22:43
- RE: Dodge U-Joints failing - TerryWimp : 9/20/2006 23:02
  - RE: Dodge U-Joints failing - F_armer : 9/21/2006 00:45
- Re: Dodge U-Joints failing - Bluffman : 9/21/2006 00:54
  - Re: Dodge U-Joints failing - Cujo1969 : 9/21/2006 01:52
    - Re: Dodge U-Joints failing....ours - Ron..NE ILL..10/48 : 9/21/2006 06:26
      - Re: Dodge U-Joints failing - ChrisOH : 9/21/2006 07:05
- Bad alignment on driveshaft, perhaps - Fighting suburbia NC : 9/21/2006 08:35
- Re: Dodge U-Joints failing - JWS : 9/21/2006 09:18
- RE: Dodge U-Joints failing - NEMOScott : 9/21/2006 13:09
- 3 dodges... - jeff gordon : 9/21/2006 15:22
- RE: Dodge U-Joints failing - ky_guy_justin : 9/21/2006 19:32
- RE: Dodge U-Joints failing - Dave Frisch : 9/21/2006 22:39
- RE: Dodge U-Joints failing - porky : 9/21/2006 22:53
- RE: Dodge U-Joints failing - JD9400 : 9/27/2006 23:19

Problems with new grease guns, anybody else? - Matt NCOK : 9/20/2006 22:31
- RE: Problems with new grease guns, anybody else? - Mike SE IL : 9/20/2006 22:38
- Re: Problems with new grease guns, anybody else? - Pat H : 9/20/2006 22:39
  - Re: Problems with new grease guns, anybody else? - Larry NCKS : 9/21/2006 06:25
- RE: Problems with new grease guns, anybody else? - RickB : 9/21/2006 06:07
- Have you considered bulk filling? - Tom Russell : 9/21/2006 06:29
  - Re: Problems with new grease guns, anybody else? - CW IL : 9/21/2006 10:12
- Re: Problems with new grease guns, anybody else? - feelnrite : 9/21/2006 19:09
  - Re: Problems with new grease guns, anybody else? - Jon Hagen : 9/21/2006 19:47
- What way are you setting the tubes in storage??? - Chad H : 9/21/2006 23:00

8 foot - 3pt Phoenix rotary harrow - iseedit : 9/20/2006 22:24

Ag fuel in a diesel pickup? - inotill : 9/20/2006 20:09
- RE: Ag fuel in a diesel pickup? - russ27 : 9/20/2006 20:26
- RE: Ag fuel in a diesel pickup? - Larry NCKS : 9/20/2006 21:12
- Re: Ag fuel in a diesel pickup? - barfuzz : 9/20/2006 21:31
- RE: Ag fuel in a diesel pickup? - COdrylander : 9/20/2006 22:19
  - RE: Ag fuel in a diesel pickup? - ky_guy_justin : 9/21/2006 21:12
- RE: Ag fuel in a diesel pickup? - Unit 2 : 9/20/2006 23:07
- need to recheck that math - SWKS : 9/20/2006 23:40
- Re: Ag fuel in a diesel pickup? - Bluffman : 9/21/2006 00:58
  - they can't force you to show a receipt - Ray (ecks) : 9/21/2006 09:08
- Re: Ag fuel in a diesel pickup? - JohnW : 9/21/2006 02:17
  - Re: Ag fuel in a diesel pickup? - crb : 9/21/2006 07:46
- RE: Ag fuel in a diesel pickup? - jeff gordon : 9/21/2006 15:26
- RE: Ag fuel in a diesel pickup? - Millhouse : 9/21/2006 15:52
- Get real . . . - iseedit : 9/21/2006 21:50

Ultra low sulfur diesel - oliver459 : 9/20/2006 19:00
- Re: Ultra low sulfur diesel - JohnW : 9/20/2006 19:07
- Re: Ultra low sulfur diesel - Ed Winkle : 9/20/2006 20:05
  - Re: Ultra low sulfur diesel - Newguy : 9/20/2006 20:13
  - Re: Ultra low sulfur diesel - Ed Winkle : 9/20/2006 20:16
  - Re: Ultra low sulfur diesel - kmcampbe : 9/20/2006 20:40
  - Re: Ultra low sulfur diesel - Larry NCKS : 9/21/2006 06:38
- Re: Ultra low sulfur diesel - dutch : 9/20/2006 21:43
  - Re: Ultra low sulfur diesel - Oliver : 9/20/2006 21:49
    - Re: Ultra low sulfur diesel - dutch : 9/20/2006 22:00
      - Re: Ultra low sulfur diesel - ChrisOH : 9/21/2006 07:20
        
        power service - dave swia : 9/21/2006 07:27
        Re: Ultra low sulfur diesel - dutch : 9/21/2006 20:45
        
        Re: Ultra low sulfur diesel - Jon Hagen : 9/21/2006 20:58
- RE:our semi has lost power - Robert in CenMo : 9/20/2006 22:14

motor wiring color code - Gerald_skca : 9/20/2006 11:42

Mid-row banders and NH3 smell - School Of Hard Knock : 9/20/2006 11:10
- Re: Mid-row banders and NH3 smell - Jon Hagen : 9/20/2006 11:39
- Re: Mid-row banders and NH3 smell - JohnW : 9/20/2006 12:24
- Re: Mid-row banders and NH3 smell - BigIron : 9/20/2006 20:23

Rich, Would you please post a picture. - Tom Jackson : 9/20/2006 10:54

2007 420 honda rancher atvs - granto : 9/20/2006 09:49
- RE: 2007 420 honda rancher atvs - feelnrite : 9/20/2006 10:16
  - Re: 2007 420 honda rancher atvs - granto : 9/20/2006 12:30
    - Re: 2007 420 honda rancher atvs - NVDave : 9/21/2006 01:48
      - RE: Apparently - nebfarmer : 9/21/2006 07:36
      - Agreed Dave......... - Chad H : 9/21/2006 13:31
        
        RE: Agreed Dave......... - agboy : 9/21/2006 20:42
        
        RE: Agreed Dave......... - Chad H : 9/21/2006 21:48
        
        RE: Agreed Dave......... - agboy : 9/21/2006 22:09
      - Re: 2007 420 honda rancher atvs - Jason Hinson : 9/21/2006 23:31

9760 Yield Monitor and Edible Beans - ndarbuckle : 9/20/2006 08:54

verstile 276 tractor - cho : 9/20/2006 08:37
- RE: verstile 276 tractor - Russ In Idaho : 9/20/2006 09:10
  - RE: verstile 276 tractor - cho : 9/22/2006 07:40

Large Hubs - TxPope : 9/20/2006 07:16

Challenger 75E brake problems - Col : 9/20/2006 07:00
- Re: Challenger 75E brake problems - cynic : 9/20/2006 09:01
  - Re: Challenger 75E brake problems - Col : 9/20/2006 12:36
    - Re: Challenger 75E brake problems - cynic : 9/20/2006 16:14
      - Re: Challenger 75E brake problems - Col : 9/20/2006 16:32
        
        Re: Challenger 75E brake problems - Col : 9/21/2006 09:48

1688 feederhouse floor - Cujo1969 : 9/19/2006 23:13
- Re: 1688 feederhouse floor - JohnW : 9/20/2006 02:22
- Re: 1688 feederhouse floor - Larry NCKS : 9/20/2006 07:26
  - Re: 1688 feederhouse floor - Clapodie : 9/21/2006 09:19
- RE: 1688 feederhouse floor - Tom Jackson : 9/20/2006 10:42
  - RE: 1688 feederhouse floor - dave swia : 9/20/2006 13:00
    - RE: 1688 feederhouse floor - nebfarmer : 9/20/2006 14:35
      - RE: 1688 feederhouse floor - pat-michigan : 9/20/2006 17:27
      - RE: 1688 feederhouse floor - dave swia : 9/20/2006 20:44
        
        Re: 1688 feederhouse floor - Cujo1969 : 9/20/2006 22:51
        RE: 1688 feederhouse floor - nebfarmer : 9/21/2006 07:43
        
        RE: 1688 feederhouse floor - dave swia : 9/21/2006 13:59

Auto header height for corn heads - Dave Cen.Ia : 9/19/2006 23:10
- RE: Auto header height for corn heads - Don NMO : 9/20/2006 00:20
- RE: Auto header height for corn heads - Larry NCKS : 9/20/2006 07:31
- RE: Auto header height for corn heads - tedbear : 9/20/2006 08:00
  - Re: Auto header height for corn heads - loran : 9/20/2006 10:07
    - Re: Auto header height for corn heads - Don NMO : 9/20/2006 13:27
- Re: Auto header height for corn heads - notilltom : 9/20/2006 09:26
- Re: Auto header height for corn heads - ht_man : 9/20/2006 11:27
  - Thanks to all for the responses - Dave Cen.Ia : 9/20/2006 13:51
    - RE: Thanks to all for the responses - ht_man : 9/20/2006 16:31

(OT) Chevy Torque Converter locked up - Merle : 9/19/2006 22:48
- Re: (OT) Chevy Torque Converter locked up - Kooiker : 9/19/2006 23:10
  - Re: (OT) Chevy Torque Converter locked up - pelon : 9/20/2006 00:31
- RE: (OT) Chevy Torque Converter locked up - kansas : 9/20/2006 07:30
- RE: Update (OT) Chevy Torque Converter locked up - Merle : 9/20/2006 18:50

Plowboy on wood blocks - bulldog : 9/19/2006 22:35
- RE: Plowboy on wood blocks - sri : 9/19/2006 23:02
  - RE: Plowboy on wood blocks - plowboy : 9/19/2006 23:42
    - RE: Plowboy on wood blocks - bkandra : 9/20/2006 07:23
- We just put them on a 9610 - BHTN : 9/20/2006 09:20
  - RE: We just put them on a 9610 - bulldog : 9/20/2006 13:43
    - We thought the same thing - BHTN : 9/20/2006 16:40
      - RE: We thought the same thing - bulldog : 9/20/2006 22:21
        
        Re: Plowboy on wood blocks - Rosco : 9/21/2006 00:04
        
        Re: Plowboy on wood blocks - Chad H : 9/21/2006 00:13
        
        Does your book say 10 hours? - BHTN : 9/21/2006 07:51
        RE: Must be a corn thing - plowboy : 9/21/2006 09:40
        
        Re: Plowboy on wood blocks - plowboy : 9/21/2006 00:32
        
        I agree - BHTN : 9/21/2006 07:53
        
        Re: Plowboy on wood blocks - Clapodie : 9/21/2006 09:30
        
        so how do you get the center two in? - dave swia : 9/21/2006 14:02
        
        yes sir, that was what I wondered - dave swia : 9/22/2006 08:01

Adapting 343 snapping head to 3950 pull type chopper - IaAngus : 9/19/2006 22:18
- RE: Adapting 343 snapping head to 3950 pull type chopper - Dingaling : 9/20/2006 04:53
- RE: Adapting 343 snapping head to 3950 pull type chopper - klemish : 9/20/2006 07:52

Combine Feederhouse remover - motram5455 : 9/19/2006 21:28
- Here you go - plowboy : 9/19/2006 21:51
  - ya beat me to it.:-) - Old Pokey : 9/19/2006 22:25
- RE: Combine Feederhouse remover - jdg : 9/19/2006 22:17
- RE: Combine Feederhouse remover - HFR : 9/20/2006 00:59
  - RE: Combine Feederhouse remover - mij : 9/20/2006 15:46
    - Re: Combine Feederhouse remover - Jon Hagen : 9/20/2006 16:17
    - RE: Combine Feederhouse remover - HFR : 9/20/2006 18:29
  - Re: Combine Feederhouse remover - Santa Claas : 9/20/2006 16:49
- I've done it two ways - BHTN : 9/20/2006 17:16
- RE: Combine Feederhouse remover - ozfarmman : 9/20/2006 20:50
  - Re: Combine Feederhouse remover - tx68 : 9/20/2006 21:30

How would you build an auger like this? - John e.c.MI : 9/19/2006 21:25
- RE: How would you build an auger like this? - hillfarmer : 9/19/2006 22:04
- RE: How would you build an auger like this? - Franz© : 9/20/2006 00:52
- RE: How would you build an auger like this? - farmboy99 : 9/20/2006 08:15
- RE: How would you build an auger like this? - mij : 9/20/2006 15:55
- RE: How would you build an auger like this? - sri : 9/20/2006 22:00

4440 oil pressure gauge - John e.c.MI : 9/19/2006 21:07
- Re: 4440 oil pressure gauge - motram5455 : 9/19/2006 21:21
- RE: 4440 oil pressure gauge - NVDave : 9/19/2006 23:05
- Re: 4440 oil pressure gauge - ronm : 9/20/2006 09:32
  - Problem solved. - John e.c.MI : 9/20/2006 15:26

JD 7720 Oil Leak - BRIAN : 9/19/2006 19:37
- RE: JD 7720 Oil Leak - deereman23 : 9/19/2006 20:09
- RE: JD 7720 Oil Leak - agrogers : 9/19/2006 20:23
  - RE: JD 7720 Oil Leak - cotman : 9/19/2006 21:28
- RE: JD 7720 Oil Leak - Filter Drain Hose - Whipper : 9/19/2006 20:59
- RE: JD 7720 Oil Leak - pbutler : 9/19/2006 21:00
- RE: JD 7720 Oil Leak - sri : 9/19/2006 23:09

Farm Science Review Field Demo's? - schwinnj : 9/19/2006 19:15
- RE: Farm Science Review Field Demo's? - IH1586 : 9/19/2006 20:12
  - Re: Farm Science Review Field Demo's? - Ed Winkle : 9/19/2006 20:50

corn reel - gbfarmer : 9/19/2006 19:11
- RE: corn reel - Cletus : 9/20/2006 07:09
- RE: corn reel - Eric SW MO : 9/20/2006 07:24
  - Re: corn reel - crb : 9/20/2006 08:19

Philosophical musings - Ham : 9/19/2006 17:58
- RE: Philosophical musings - Kingbaby : 9/19/2006 20:56

1440 feeder reverser ??? - deewight : 9/19/2006 17:27
- RE: 1440 feeder reverser ??? - SteveOH : 9/19/2006 18:02
  - RE: 1440 feeder reverser ??? - deewight : 9/19/2006 18:58
    - RE: 1440 feeder reverser ??? - SteveOH : 9/20/2006 08:00
- RE: 1440 feeder reverser ??? - Cliff SEIA : 9/19/2006 21:09
  - Re: 1440 feeder reverser ??? - boog : 9/19/2006 22:19

Jump to page: < 9986 9987 9988 9989 9990 9991 ... 9992 9993 9994 9995 9996 9997 9998 ... > Forums List -> Machinery Talk
(Search this forum)

(Delete cookies)