Viewing a forum - Machinery Talk

Forums | Classifieds (104) | Skins | Language

You are logged in as a guest. ( logon | register )

Machinery Talk
		Message format

Jump to page: < 10001 10002 10003 10004 10005 10006 ... 10007 10008 10009 10010 10011 10012 10013 ... > Forums List -> Machinery Talk

Tile Plow - JRH : 8/13/2006 22:08
- RE: Tile Plow - Clay-All-Over : 8/14/2006 00:15
- RE: Tile Plow - dave morgan : 8/14/2006 07:53
  - Re: Tile Plow - boog : 8/14/2006 09:41
- RE: Tile Plow - VVV : 8/14/2006 10:30
- RE: Tile Plow - Grasseed : 8/14/2006 11:06
- There is more much important things than length - Earl : 8/14/2006 13:20
- Re: Tile Plow - KDD : 8/14/2006 13:22
- Re: Tile Plow - John In Ontario : 8/14/2006 17:58
- Re: Tile Plow - dibber : 8/14/2006 19:47
  - Re: Tile Plow - dibber : 8/14/2006 19:53
- RE: Tile Plow - astoller : 8/14/2006 22:55

O/T Boats -- I/O vs Stern Drive - Jonesey : 8/13/2006 20:50
- Re: O/T Boats -- I/O vs Stern Drive - John..neAR : 8/13/2006 21:20

1680 in corn - cotton880 : 8/13/2006 20:16
- RE: 1680 in corn - RAB : 8/13/2006 21:11
- RE: 1680 in corn - John..neAR : 8/13/2006 22:04

ANybody have a guess at what in the heck this is? - plowboy : 8/13/2006 19:07
- It is a QuadHoe. nt - agboy : 8/13/2006 19:09
  - Okay, I'll bite.............. - plowboy : 8/13/2006 19:18
    - RE: Okay, I'll bite.............. - agboy : 8/13/2006 19:25
      - RE: Okay, I'll bite.............. - Paul(WI) : 8/13/2006 20:23
        
        RE: Okay, I'll bite.............. - agboy : 8/13/2006 20:25
- RE: ANybody have a guess at what in the heck this is? - Hop-a-long : 8/13/2006 19:21
  - RE: HAW HEE HEE HAH, That's funny!!!!!!!!!! - tj_farms : 8/14/2006 07:51
- RE: ANybody have a guess at what in the heck this is? - Guest : 8/13/2006 19:29
- spoiler - Gerard : 8/13/2006 19:30
  - RE: spoiler - agboy : 8/13/2006 19:34
    - RE: spoiler - Gerard : 8/13/2006 19:37
- RE: ANybody have a guess at what in the heck this is? - guest : 8/13/2006 19:55
- RE: ANybody have a guess at what in the heck this is? - Guest : 8/13/2006 20:19
- Re: ANybody have a guess at what in the heck this is? - JOJOBEAN : 8/13/2006 20:20
- RE: ANybody have a guess at what in the heck this is? - ben : 8/13/2006 20:55
- RE: ANybody have a guess at what in the heck this is? - Franz : 8/13/2006 21:04
  - RE: ANybody have a guess at what in the heck this is? - Bernie nw ON : 8/13/2006 22:19
- I don't know, but................... - Newguy in the shop : 8/13/2006 21:09
- Its a very good photoshop. - RAB : 8/13/2006 21:21
  - RE: Its a very good photoshop. - Gerard : 8/13/2006 21:41
  - Here is the video link... - Macy : 8/14/2006 04:53
    - RE: Here is the video link... - paul the original : 8/15/2006 02:12
- I still want one. - Old Pokey : 8/13/2006 22:17
- RE: ANybody have a guess at what in the heck this is? - FarmerTom : 8/14/2006 06:20
- RE: ANybody have a guess at what in the heck this is? - Von WC Ohio : 8/14/2006 06:30
  - RE: ANybody have a guess at what in the heck this is? - Guest : 8/14/2006 06:51
  - That's interesting. Thanks for the picture. - Old Pokey : 8/14/2006 08:51

Center pins on a Ranger Sprayer - willmarman : 8/13/2006 17:49
- RE: Center pins on a Ranger Sprayer - jdg : 8/13/2006 17:54
  - Re: Center pins on a Ranger Sprayer - willmarman : 8/13/2006 22:50
    - Re: Center pins on a Ranger Sprayer - jdg : 8/13/2006 23:32

Grain Vac compard to sweep auger - vernon : 8/13/2006 16:58
- Power sweep - Curt Keiser : 8/13/2006 17:12
- RE: Grain Vac compared to sweep auger - Ron..NE ILL..10/48 : 8/13/2006 17:17
- RE: Grain Vac compard to sweep auger - Newguy in the shop : 8/13/2006 18:54
- RE: Grain Vac compard to sweep auger - dave morgan : 8/13/2006 19:25
  - That was short. (: - Tim Cooke : 8/13/2006 20:38
    - RE: That was short. (: - dave morgan : 8/14/2006 06:51
      - I must have those dumb Ky. sweeps. - Tim Cooke : 8/14/2006 07:13
        
        RE: I must have those dumb Ky. sweeps. - dave morgan : 8/14/2006 08:22
        
        Oh yeah. - Tim Cooke : 8/14/2006 08:58
      - I agree with dave - dave swia : 8/14/2006 08:15
        
        2nd that - Dave Cen.Ia : 8/14/2006 08:51
- RE: Grain Vac compard to sweep auger - Guest : 8/13/2006 19:42

Defying the laws of physics - dibber : 8/13/2006 16:44
- RE: Defying the laws of physics - agboy : 8/13/2006 16:51
  - RE: Defying the laws of physics - deereman23 : 8/13/2006 16:57
- That's simple enough - Ray (ecks) : 8/13/2006 16:53
- RE: Defying the laws of physics - Guest : 8/13/2006 17:07
  - It wouldn't take that much - Ray (ecks) : 8/13/2006 17:29
- Re: Defying the laws of physics - KDD : 8/13/2006 17:30
- RE: Defying the laws of physics - combinejockey : 8/13/2006 17:42
  - RE: Defying the laws of physics - agboy : 8/13/2006 17:46
    - RE: Defying the laws of physics - combinejockey : 8/13/2006 21:43
      - RE: Defying the laws of physics - farmboy99 : 8/13/2006 22:32
        
        RE: Defying the laws of physics - Chad H : 8/13/2006 23:34
- RE: Defying the laws of physics - plowboy : 8/13/2006 18:52
- RE: Defying the laws of physics - BrentOntario : 8/14/2006 10:29

Strip till advice - Veryea : 8/13/2006 16:29
- RE: Strip till advice - Ont nu-tiller : 8/13/2006 21:22

693 Corn Head - Isaiah : 8/13/2006 15:41
- Re: 693 Corn Head - plowboy : 8/13/2006 15:49
  - Re: 693 Corn Head - jdg : 8/13/2006 16:11
    - Re: 693 Corn Head - mylo : 8/13/2006 16:51
    - Re: 693 Corn Head - plowboy : 8/13/2006 18:53

F250 wheel size - MZ1 : 8/13/2006 15:08
- Re: F250 wheel size - plowboy : 8/13/2006 15:50
  - Re: F250 wheel size - ben : 8/13/2006 21:03
  - Re: F250 wheel size - Kelly : 8/13/2006 23:06
    - Re: F250 wheel size - plowboy : 8/14/2006 00:15
- RE: F250 wheel size - Kelly : 8/13/2006 23:08
  - Re: F250 wheel size - Fighting suburbia NC : 8/14/2006 13:50

Antique Tractors - Stanley : 8/13/2006 10:07
- RE: Antique Tractors - TerryWimp : 8/13/2006 12:58
- RE: Antique Tractors - Kingbaby : 8/13/2006 15:23
  - RE: Antique Tractors - agboy : 8/13/2006 15:30
    - RE: Ice Cream Capital - martin : 8/13/2006 17:28
      - RE: Ice Cream Capital - notilltom : 8/13/2006 22:57
- Man, those TC 40-60's... - ronm : 8/13/2006 23:10

Tractor wont fire. - feelnrite : 8/13/2006 10:00
- RE: Tractor wont fire. - Gerald J. : 8/13/2006 10:43
  - RE: Tractor wont fire. - feelnrite : 8/13/2006 11:07
    - RE: Tractor wont fire. - Gerald J. : 8/13/2006 16:24
  - RE: Tractor wont fire. - feelnrite : 8/14/2006 11:42
    - RE: Tractor wont fire. - Gerald J. : 8/14/2006 13:50
- RE: Tractor wont fire. - Guest : 8/13/2006 12:02
  - Re: Tractor wont fire. - feelnrite : 8/13/2006 12:33
- Re: Tractor wont fire. - Tim KS : 8/13/2006 12:42
- RE: Tractor wont fire. - Guest : 8/14/2006 00:10
  - RE: Tractor wont fire. - feelnrite : 8/14/2006 09:52

Dutch - cotton farmer : 8/13/2006 09:24
- Re: Dutch - dutch : 8/13/2006 09:37
  - Off Topic...France trip? - guest : 8/13/2006 10:15
    - Re: Dutch - dutch : 8/13/2006 16:14
      - Re: Dutch - tommyw-5088 : 8/14/2006 12:10
        
        Re: Dutch - dutch : 8/14/2006 13:44

Changing pickup from two tanks to one, can it be done? - JohnKS : 8/13/2006 07:42
- RE: Changing pickup from two tanks to one, can it be done? - Ed Boysun : 8/13/2006 09:27
  - RE: Changing pickup from two tanks to one, can it be done? - a friend said : 8/13/2006 12:11
    - Re: Changing pickup from two tanks to one, can it be done? - JohnKS : 8/13/2006 12:25
      - Replace the switch with a T - Hay Wilson in TX : 8/13/2006 15:09
        
        Re: Changing pickup from two tanks to one, can it be done? - tommyw-5088 : 8/13/2006 19:30
      - Re: Changing pickup from two tanks to one, can it be done? - Ed Winkle : 8/13/2006 22:15
- RE: Changing pickup from two tanks to one, can it be done? - trapper219 : 8/14/2006 09:45

Harvest pics & movie - Ed Boysun : 8/13/2006 01:30
- RE: Harvest pics & movie - Jorn : 8/13/2006 03:51
- RE: Harvest pics & movie - Paul(WI) : 8/13/2006 08:57
- Re: Harvest pics & movie - JOJOBEAN : 8/14/2006 02:55
  - Re: Harvest pics & movie - agboy : 8/14/2006 14:19
    - Re: Harvest pics & movie - Kelly : 8/14/2006 17:33

Circuit boards - gman : 8/12/2006 22:59
- Here is a good place. - Tim Cooke : 8/12/2006 23:16
  - RE: Here is a good place. - eastcoastharvester : 8/13/2006 09:56

Ford 7.3 Diesel bell housing pattern - plowboy : 8/12/2006 22:09
- RE: Ford 7.3 Diesel bell housing pattern - John Burns : 8/12/2006 22:36
- RE: Ford 7.3 Diesel bell housing pattern - Applicator : 8/13/2006 10:45
  - RE: Ford 7.3 Diesel bell housing pattern - plowboy : 8/13/2006 15:47
    - RE: Ford 7.3 Diesel bell housing pattern - Bern : 8/13/2006 17:32
    - RE: Ford 7.3 Diesel bell housing pattern - Kelly : 8/13/2006 22:58
      - RE: Ford 7.3 Diesel bell housing pattern - Applicator : 8/14/2006 09:00

Went to Almelund threshing show..couple of pics - Steve NW WI : 8/12/2006 21:50
- Re: Went to Almelund threshing show..couple of pics - bollpuller : 8/12/2006 22:02
- RE: Went to Almelund threshing show..couple of pics - Gary Lyon : 8/13/2006 00:46
- Re: Went to Almelund threshing show..couple of pics - KDD : 8/13/2006 19:28

Rating Grain Hopper Trailers. - Tim Cooke : 8/12/2006 20:57
- RE: Rating Grain Hopper Trailers. - hillfarmer : 8/12/2006 21:19
  - Yes, but. - Tim Cooke : 8/12/2006 21:28
    - RE: Yes, but. - TerryWimp : 8/12/2006 21:36
      - Remember doing that. - Tim Cooke : 8/12/2006 21:47
        
        RE: Remember doing that. - TerryWimp : 8/12/2006 22:01
        
        Never work. - Tim Cooke : 8/12/2006 22:12
        
        RE: Never work. - TerryWimp : 8/12/2006 22:35
      - tried to do that once - Ray (ecks) : 8/13/2006 00:36
        
        probably looked something like this.. - dave swia : 8/13/2006 08:08
        
        Re: Rating Grain Hopper Trailers. - Dennis SEND : 8/13/2006 12:03
        RE: probably looked something like this.. - Chad H : 8/13/2006 12:27
        no 24% stacks up higher :) - Ray (ecks) : 8/13/2006 13:47
        
        RE: tried to do that once - dave morgan : 8/13/2006 19:28
        
        RE: tried to do that once - Ray (ecks) : 8/13/2006 21:21
        
        RE: tried to do that once - hillfarmer : 8/13/2006 23:15
        RE: only one semi? - dave morgan : 8/14/2006 07:04
        
        RE: The Wabash ? - Mike SE IL : 8/14/2006 07:32
        RE: only one semi? - Ray (ecks) : 8/14/2006 08:28

hyd return - 3594 - cjv : 8/12/2006 20:15
- RE: hyd return - 3594 - Oliver : 8/12/2006 21:16
  - Re: hyd return - 3594 - Panhandler : 8/15/2006 10:06

Komatsu d65 value, 1981 - dixonman : 8/12/2006 19:45

Field tracker on 2388 question - toolman : 8/12/2006 19:16
- RE: Field tracker on 2388 question - tj_farms : 8/12/2006 21:14
- RE: Field tracker on 2388 question - MAGNUM8950 : 8/15/2006 14:08

John Deere 7820MFW - Buck : 8/12/2006 17:41
- Calibrate your trans - KelB : 8/12/2006 20:08
- RE: John Deere 7820MFW - KTinSD : 8/13/2006 04:40

1996 Sthaly Lime Tuck - Buck : 8/12/2006 17:35
- RE: 1996 Sthaly Lime Tuck - tj_farms : 8/12/2006 21:23

How many acres per day with one combine? - Guest : 8/12/2006 17:34
- RE: How many acres per day with one combine? - jasonl : 8/12/2006 18:02
  - RE: How many acres per day with one combine? - Beltbreaker : 8/12/2006 18:54
    - RE: How many acres per day with one combine? - plowboy : 8/12/2006 20:06
      - Re: How many acres per day with one combine? - mike treweeke : 8/12/2006 22:06
        
        Re: How many acres per day with one combine? - Beltbreaker : 8/13/2006 03:07
        
        Re: How many acres per day with one combine? - mike treweeke : 8/13/2006 03:30
- RE: How many acres per day with one combine? - Chad H : 8/12/2006 19:03
  - Re: How many acres per day with one combine? - dutch : 8/12/2006 22:09
- RE: How many acres per day with one combine? - farmboy99 : 8/12/2006 23:19

fixing 8 bag KW - Robert in CenMo : 8/12/2006 17:18
- RE: fixing 8 bag KW - none : 8/12/2006 17:27
  - RE: timbren - Robert in CenMo : 8/13/2006 09:06
- RE: fixing 8 bag KW - Ray (ecks) : 8/13/2006 00:41

math question re. length of auger when raised up to top of bin - still-learning : 8/12/2006 16:33
- RE: math question re. length of auger when raised up to top of bin - Dennis : 8/12/2006 16:45
  - c'mon denny make it easy for me - still-learning : 8/12/2006 16:55
    - RE: c'mon denny make it easy for me - Ron..NE ILL..10/48 : 8/12/2006 17:58
    - RE: c'mon denny make it easy for me - Dennis : 8/16/2006 22:36
- RE: math question re. length of auger when raised up to top of bin - nd mike : 8/12/2006 17:04
  - Re: math question re. length of auger when raised up to top of bin - Dennis SEND : 8/12/2006 18:36
- RE: math question re. length of auger when raised up to top of bin - plowboy : 8/12/2006 20:13
  - thanks, guys for the help, i am difinetly going to put my bin up first then set auger - Guest : 8/13/2006 09:33
- RE: math question re. length of auger when raised up to top of bin - Mr. Snerdly1 : 8/13/2006 19:51
- RE: math question re. length of auger when raised up to top of bin - farmboy99 : 8/13/2006 23:04

Milker detachers - Guest : 8/12/2006 16:03
- RE: Milker detachers - russ27 : 8/13/2006 10:01

27 ' wide ring bin sheets - houndog : 8/12/2006 14:39
- Re: 27 ' wide ring bin sheets - Ed Winkle : 8/12/2006 16:20
  - How many rings high. - Tim Cooke : 8/12/2006 16:37
  - Re: 27 ' wide ring bin sheets - houndog : 8/13/2006 09:49

Keewanee Auger dealers - 5250JB : 8/12/2006 14:21

Grain bin lid - dakota : 8/12/2006 12:55
- RE: Grain bin lid - Illinois John : 8/12/2006 14:26
  - RE: Grain bin lid - Dvr : 8/12/2006 15:34
    - RE: Grain bin lid - Illinois John : 8/12/2006 16:19
    - RE: Grain bin lid - Cliff SEIA : 8/13/2006 09:40

vertical tillage and equipment - elmo : 8/12/2006 09:19
- RE: vertical tillage and equipment - shucks : 8/12/2006 10:57
- RE: vertical tillage and equipment - JDPlowboy : 8/12/2006 11:34
  - RE: vertical tillage and equipment - Danny Beach : 8/12/2006 11:55
  - RE: vertical tillage and equipment - James2 : 8/12/2006 12:24
- RE: vertical tillage and equipment - Cliff SEIA : 8/12/2006 11:57
- Re: vertical tillage and equipment - Mike : 8/12/2006 12:57
- RE: vertical tillage and equipment - Sprout : 8/12/2006 13:20
  - Strip Till & Incorporation - Jim : 8/12/2006 14:33
  - Re: vertical tillage and equipment - Chad : 8/12/2006 15:25
    - Re: vertical tillage and equipment - donewell : 8/12/2006 16:13
    - ?'s for Jim and Chad - Sprout : 8/12/2006 16:15
      - sprout check out soilwarrior - still=learning : 8/12/2006 17:00
        
        RE: sprout check out soilwarrior - Sprout : 8/12/2006 19:48
        
        RE: sprout he has a web site@ www.soilwarrior.com - still-learning : 8/13/2006 13:03
      - RE: ?'s for Jim and Chad - Chad : 8/12/2006 17:16
        
        RE: ?'s for Jim and Chad - Sprout : 8/12/2006 19:56
        
        RE: ?'s for Jim and Chad - Chad : 8/13/2006 09:09
        We do that. - seand : 8/13/2006 15:20
      - RE: ?'s for Jim and Chad - wide range of strip till topics - Jim : 8/13/2006 14:56
        
        Re: vertical tillage and equipment - Chad : 8/14/2006 07:48
  - Re: vertical tillage and equipment - Mike : 8/12/2006 17:42
    - Re: vertical tillage and equipment - Sprout : 8/12/2006 20:00
  - RE: vertical tillage and equipment - JDPlowboy : 8/12/2006 18:02
    - RE: vertical tillage and equipment - chadh : 8/12/2006 20:02
- RE: vertical tillage and equipment - agboy : 8/13/2006 13:54
  - RE: vertical tillage and equipment - Jim : 8/13/2006 15:00
    - RE: vertical tillage and equipment - agboy : 8/13/2006 15:17
      - RE: vertical tillage and equipment - Jim : 8/13/2006 20:54
        
        RE: vertical tillage and equipment - Chad H : 8/14/2006 00:18
        
        RE: vertical tillage and equipment - Jim : 8/14/2006 01:55

1486, broken rear axle shaft, how to get it home? - Jon : 8/11/2006 23:44
- Re: 1486, broken rear axle shaft, how to get it home? - plowboy : 8/12/2006 00:05
- RE: 1486, broken rear axle shaft, how to get it home? - sri : 8/12/2006 00:43
- RE: 1486, broken rear axle shaft, how to get it home? - Badger : 8/12/2006 08:44
- RE: 1486, broken rear axle shaft, how to get it home? - Dennis : 8/12/2006 08:55
- Think for bit before you load it onto a trailer. - Old Pokey : 8/12/2006 09:23
- RE: 1486, broken rear axle shaft, how to get it home? - guest : 8/12/2006 09:49
  - RE: 1486, broken rear axle shaft, how to get it home? - Jon : 8/12/2006 14:12
    - Jon, You're the Man - John..neAR : 8/12/2006 15:14
      - We had a back axle break once in the field. - Illinois John : 8/12/2006 15:24
- It"s Home!!!!!!!!!!!!! - Jon : 8/12/2006 20:25
  - That's great news. - Old Pokey : 8/12/2006 20:58
  - Wish I had pictures .... - Ernie : 8/12/2006 22:28
    - RE: Wish I had pictures .... - Moose : 8/13/2006 00:16

07 fuel, what are your thaughts? - Jon : 8/11/2006 22:21
- RE: 07 fuel, what are your thaughts? - Steve : 8/11/2006 23:01
  - Does adding Biodiesel affect storage life? - Illinois John : 8/11/2006 23:11
    - RE: Does adding Biodiesel affect storage life? - Steve : 8/12/2006 01:04
- Re: 07 fuel, what are your thaughts? - Skinhead : 8/12/2006 00:44
  - Re: 07 fuel, what are your thaughts? - feelnrite : 8/12/2006 09:20
- RE: 07 fuel, what are your thaughts? - JDPlowboy : 8/12/2006 01:06
  - RE: 07 fuel, what are your thaughts? - mike treweeke : 8/12/2006 04:11
- Re: 07 fuel, what are your thaughts? - Tom Russell : 8/12/2006 06:27
  - Low sulfur additive - Larry NCKS : 8/12/2006 07:56
    - need to know, rather want to know. - joe : 8/12/2006 09:50
      - RE: need to know, rather want to know. - Larry NCKS : 8/12/2006 12:29
        
        RE: need to know, rather want to know. - joe : 8/12/2006 18:52
    - Re: 07 fuel, what are your thaughts? - Tom Russell : 8/13/2006 06:35
- RE: 07 fuel, what are your thaughts? - Applicator : 8/12/2006 09:07
- RE: 07 fuel, what are your thaughts? - Jon Hagen : 8/12/2006 14:08
  - Re: 07 fuel, what are your thaughts? - tommyw-5088 : 8/12/2006 22:35

grain cleaners - SWND : 8/11/2006 22:00
- RE: grain cleaners - ,, : 8/12/2006 00:37

Fires - JD 9000 Series Combines - Have Some Questions - Whipper : 8/11/2006 20:16
- RE: Fires - JD 9000 Series Combines - Have Some Questions - msb : 8/11/2006 21:47
  - Tell me more about the chain - Clay-All-Over : 8/12/2006 00:00
    - RE: Tell me more about the chain - Kelly : 8/12/2006 07:38
      - RE: Tell me more about the chain - Steve : 8/12/2006 10:51
        
        Re: Fires - JD 9000 Series Combines - Have Some Questions - Jon Hagen : 8/12/2006 17:32
        
        I had one at the batteries, and - JK SCLA : 8/12/2006 22:23
        Re: Fires - JD 9000 Series Combines - Have Some Questions - msb : 8/12/2006 23:44
        Jon, That's going to be a fall project - Ed Boysun : 8/13/2006 00:02
        
        Re: Fires - JD 9000 Series Combines - Have Some Questions - Jon Hagen : 8/13/2006 11:29
- RE: Fires - JD 9000 Series Combines - Have Some Questions - pat : 8/11/2006 22:44
  - RE: Fires - JD 9000 Series Combines - Have Some Questions - Dave Cen.Ia : 8/12/2006 00:07
- RE: Fires - JD 9000 Series Combines - Have Some Questions - plowboy : 8/11/2006 23:24
  - RE: Fires - JD 9000 Series Combines - Have Some Questions - combinejockey : 8/12/2006 10:10
  - RE: Fires - JD 9000 Series Combines - Have Some Questions - mij : 8/12/2006 10:21
- Re: Fires - JD 9000 Series Combines - Have Some Questions - Dwayne MB : 8/12/2006 11:19
  - Re: Fires - JD 9000 Series Combines - Have Some Questions - 4 row cattle : 10/20/2017 10:23

What do you do to conserve fuel? - e81t1k2 : 8/11/2006 20:12

What do you do to conserve fuel? - e81t1k2 : 8/11/2006 20:10
- Re: What do you do to conserve fuel? - tommyw-5088 : 8/11/2006 21:36
  - Re: What do you do to conserve fuel? - jeff gordon : 8/12/2006 11:04
- Great post - Tom Graham : 8/11/2006 23:07
  - RE: Great post - M Thomas : 8/11/2006 23:17
    - RE: Great post - e81t1k2 : 8/12/2006 04:05
  - RE: Great post - guest : 8/12/2006 06:17
    - 925 - Tom Graham : 8/12/2006 06:40
- RE: What do you do to conserve fuel? - mike in sw mn : 8/12/2006 10:21
  - Re: What do you do to conserve fuel? - Nathan ECMN : 8/12/2006 14:20
    - Re: What do you do to conserve fuel? - PPo : 8/12/2006 14:50

Wick bar or wiper arm? - Hay Wilson in TX : 8/11/2006 19:20
- RE: Wick bar or wiper arm? - msb : 8/11/2006 21:50
- Re: Wick bar or wiper arm? - dutch : 8/11/2006 22:26
  - Thank you Dutch, just what I wanted! - Hay Wilson in TX : 8/12/2006 07:11
    - Re: Wick bar or wiper arm? - dutch : 8/12/2006 17:26

Case 580K - ekeller2 : 8/11/2006 19:15
- RE: Case 580K - dave morgan : 8/12/2006 05:44
- RE: Case 580K - Guest : 8/12/2006 13:14

590 JD windrower unfolding procedures?? - Nature of the beast? : 8/11/2006 18:41
- Re: 590 JD windrower unfolding procedures?? - Jon Hagen : 8/11/2006 21:29
  - Re: 590 JD windrower unfolding procedures?? - embarased 590 guy : 8/12/2006 00:26
    - Re: 590 JD windrower unfolding procedures?? - Jon Hagen : 8/12/2006 01:15
- RE: 590 JD windrower unfolding procedures?? - Duane in ND : 8/12/2006 07:47
- Are all folding windrowers made the same? - 590 guy : 8/12/2006 10:17
  - Re: 590 JD windrower unfolding procedures?? - Jon Hagen : 8/12/2006 14:20
    - Re: 590 JD windrower unfolding procedures?? - Chad H : 8/12/2006 17:16
      - Re: 590 JD windrower unfolding procedures?? - Jon Hagen : 8/12/2006 17:45
- RE: 590 JD windrower unfolding procedures?? - School Of Hard Knock : 7/30/2012 01:29

Krause 1928 disc - guesse : 8/11/2006 13:10

What ever happened to JD8520? - seand : 8/11/2006 12:25
- RE: What ever happened to JD8520? - jdg : 8/11/2006 13:06
- Re: What ever happened to JD8520? - ronm : 8/11/2006 15:24
  - Re: What ever happened to JD8520? - shucks : 8/11/2006 22:01
    - just one of the... - ronm : 8/12/2006 10:42

Jim @ Dawn - BruceSWMI : 8/11/2006 10:01
- Re: Jim @ Dawn - Greywolf : 8/11/2006 10:35
- Strip Till vs all on the planter in Michigan - Jim : 8/11/2006 11:42
  - RE: Strip Till vs all on the planter in Michigan - paul the original : 8/13/2006 03:07

4640 Spray Coupe - brad c : 8/11/2006 09:53
- RE: 4640 Spray Coupe - Silver Shoes : 8/11/2006 22:50

9600 injector, fuel pump - silver : 8/11/2006 09:14

New Holland 855,853 baler question. - the other green : 8/11/2006 09:14
- RE: New Holland 855,853 baler question. - Eddy in TN : 8/11/2006 18:28
  - RE: New Holland 855,853 baler question. - the other green : 8/12/2006 09:16

Be careful on the roads with equipment - Fighting suburbia NC : 8/11/2006 08:14
- Re: Be careful on the roads with equipment - Ed Winkle : 8/11/2006 08:50
  - Re: Be careful on the roads with equipment - tommyw-5088 : 8/11/2006 09:12
    - Re: Be careful on the roads with equipment - Tim(nj) : 8/11/2006 11:02
      - Re: Be careful on the roads with equipment - JohnKS : 8/11/2006 14:09
        
        Re: Be careful on the roads with equipment - PeteMN : 8/12/2006 02:13
- RE: Be careful on the roads with equipment - ronm : 8/11/2006 09:10
  - RE: Be careful on the roads with equipment - farmb0y : 8/11/2006 13:48
- RE: Be careful on the roads with equipment - plowboy : 8/11/2006 16:03
  - Re: Be careful on the roads with equipment - Fighting suburbia NC : 8/11/2006 17:23
  - Re: Be careful on the roads with equipment - JohnKS : 8/11/2006 17:43
  - RE: Be careful on the roads with equipment - agboy : 8/11/2006 20:00
    - RE: Be careful on the roads with equipment - Oliver : 8/11/2006 22:16
  - RE: Be careful on the roads with equipment - loran : 8/12/2006 10:04
- RE: Be careful on the roads with equipment - willy : 8/11/2006 18:16
- RE: Be careful on the roads with equipment - KTinSD : 8/12/2006 00:25
- RE: Be careful on the roads with equipment - loran : 8/12/2006 09:59

2166 Unload auger - BJN : 8/11/2006 07:12
- Re: 2166 Unload auger - brad : 8/11/2006 19:05
  - Re: 2166 Unload auger - striker782 : 8/12/2006 00:37
    - Re: 2166 Unload auger - BJN : 8/12/2006 09:47
      - Re: 2166 Unload auger - striker782 : 8/12/2006 10:17
        
        Re: 2166 Unload auger - BJN : 8/12/2006 21:47

Need info on Ward Equip. Greensburg, IN - Ray (ecks) : 8/10/2006 23:22
- RE: Need info on Ward Equip. Greensburg, IN - Guest : 8/13/2006 06:59

Jump to page: < 10001 10002 10003 10004 10005 10006 ... 10007 10008 10009 10010 10011 10012 10013 ... > Forums List -> Machinery Talk
(Search this forum)

(Delete cookies)