|
East central Ohio | Good morning. Late last summer I purchased a nice looking and sounding 844 rogator. The brake system pressure gauge was all cloudy and u couldn't see it but everything seemed to function normally. Brakes applied, released, didn't get hot while driving, etc. Fast forward to this spring and I bought a new gauge and when I went to install it the line to the back of the gauge was bone dry, no evidence of oil at all. I install new gauge and of course had 0 brake system pressure. Charge pressure is 400 at an idle. Any ideas? Everything still seems to function fine. It has been suggested I call the gator center and I will when I have time to work on it. On a side note, I took it out to top dress wheat and lost a rod bearing, so it's getting a new motor and I thought I would look into the brake issue while it was down. Thanks for any help.
Edited by MF3680 4/27/2024 07:49
| |
|
Rogator 844
