|
South Australia | Just wondering if anyone has any experience in setting up a CSI-Wireless SBA-1. I downloaded the CSI beacon receiver command centre and have connected to the receiver. Tune/Status infomation shows that the receiver has locked onto the correct marine beacon signal. Terminal shows raw data, RTCM and Hex although when only the nmea bullet is selected no data is displayed. Can somebody please tell me how to get this receiver to transmit data that would be suitable for a ez-guide +. Thanks Waterbottle.
 (dgps_h1.jpg)
Attachments
----------------
 dgps_h1.jpg (6KB - 276 downloads)
| |
|
CSI Wireless sba-1 config
