Posted 9/29/2007 14:43 (#211689) Subject: EZ steer Plus and offset on a 36' honneybee header
i have a 2388 combine with a 36' honneybee header, the header is offset 1 foot to the right.... it now has been two years and i just cannot find a correct offset for it, i have tried every number i could think of and it is always closer to one side than the other
i found that using a 6"r is the best i can find, but still off by 1 to 2 feet... i have the total length set to 34.6feet
EZ steer Plus and offset on a 36' honneybee header
