|
![](/profile/get-photo.asp?memberid=89&type=profile&rnd=410) Croswell, Michigan | After fighting some electrical problems, some self inflicted, on my 4440 I am down to one minor problem. I put in a new oil pressure gauge on our Deere dealers recomendation because the old one would just peg the needle constantly. The new gauge seems to work better but will not come back to the left(low pressure) side at all. It goes pretty far to the right even at idle and will move a little more when the motor RPM's go up but it will not come back down even with the key in the off position. Would a new sending unit 'fix' this? | |
|