|
Northern Ontario | I took my 2006 8104 out of the shed hoping to spread some nitrogen on my wheat but when I was trying it out to make sure everything was working I noticed that only the left hand boom was painting on my Viper 4 screen. I checked what I could and then called Raven support. The tech checked all my settings etc. through the phone hotspot but couldn't resolve the issue. Both switches light up when I put them on but somehow doesn't seem to be communicating that it`s on to the viper4. I switched the wires on the air switches at the back of the machine but the problem stays the same. I'll try to follow the wires to see where they go but it's not easy. Any Ideas? | |
|