|
| I posted my fall made strips a few days ago...ChadH requested some pics of the rig...so here is the best I have. Again, it is a B&H frame/stainless tank (6ton) with Remlinger units. The B&H origianaly had 6 units up front center and 6 on rear bar (3 on each wing). When I went to the Remlinger units they wouldn't fit under the tank (auto reset spring too tall) so I put all 12 on the rear bar...works great...just tail heavy. Only drawback is I can't see the center 4 units....that is why B&H puts them the way they do. Hope you enjoy the pics.
 (Nelson Farms 11_07 015.jpg)
 (Nelson Farms 11_07 016.jpg)
 (Nelson Farms 11_07 018.jpg)
 (Nelson Farms 11_07 019.jpg)
 (Nelson Farms 11_07 020.jpg)
 (Nelson Farms 11_07 024.jpg)
 (Nelson Farms 11_07 028.jpg)
Attachments
----------------
 Nelson Farms 11_07 015.jpg (48KB - 137 downloads)
Nelson Farms 11_07 016.jpg (60KB - 141 downloads)
Nelson Farms 11_07 018.jpg (55KB - 135 downloads)
Nelson Farms 11_07 019.jpg (57KB - 145 downloads)
Nelson Farms 11_07 020.jpg (67KB - 135 downloads)
Nelson Farms 11_07 024.jpg (40KB - 141 downloads)
Nelson Farms 11_07 028.jpg (100KB - 131 downloads)
| |
|
Strip till rig pics
