Delta | Mac Sw On - 5/26/2023 04:10
Running an Agleader Integra in a CIH magnum pulling a JD 1990 drill. Using virtual terminal to monitor drill functions. Radar on the tractor has been acting up causing no speed input into the monitor which shuts down blockage information. If we unplug radar the tractor defaults to transmission speed and we have gps speed on the Integra but can not figure out how to get virtual terminal to use either of these speed inputs. Any help greatly appreciated.
On the Ag leader side under ISOBUS settings, enable ISO GBSD broadcast. |
Agleader Integra virtual terminal problem
