|
SE Nebraska | My old machine used two Micro-trak 3405fll monitors to control NH3 and a dry box. Each had a serial port, one connected to an Integra and the other to a pro 700 to variable rate.
I bought a John Deere 2510H and will put my dry box on it. The 2510H is set up for Ag Leader. Has a 4000726-12 cable to the front of the hitch. A liquid product control module on the bar with a raven adapter cable back to the raven cooler.
I used to be able to find the drawings on the Ag Leader site but can't now, did they change that?
1.What cable number is needed from the NH3 hitch to the Integra. I currently have a 4001375-12 to the integra and a 4002026-15 power cable.
Some other cables that I have are 4000318-3, 4000310-1 and 4000315-6.
2. To control the dry box is it as simple as adding another liquid product control module connecting it to the can bus. I don't need fan speed or hopper level, just speed sensor and servo control, so I don't think I need the 3 channel dry module.
Edit:
3. Do I need an auxiliary input module and the switch box? I do have 3 section control on the new NH3 machine.
I do have the multi product control unlock.
Edited by Todd P 1/20/2024 07:38
| |
|
Ag Leader NH3 wiring help needed.
