AgTalk Home
AgTalk Home
Search Forums | Classifieds (2) | Skins | Language
You are logged in as a guest. ( logon | register )

JD4850 & AutoTrac Universal Problems
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
mij
Posted 5/8/2006 10:34 (#10629 - in reply to #10588)
Subject: Re: JD4850 & AutoTrac Universal Problems


SC, MN.
check your your lead compensation, set it further out in front of your tractor, max is 100"
have you calibrated your TCM. The best is to calibrate it on concrete. If in doubt recalibrate !!!
Also make sure the processor is set on tractor & not any other machine.
Also check your measurments from the ground to the top of receiver, round the # down if in doubt.
" " " " " " front axle to the receiver.

keep us posted on your results.

Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)