|
NS Canada | Should be able to walk on water now.
Had a post over in machinery asking if I could swap the newer style 8 bolt cast hubs & axles over to an older 457. They fit ok, Didn't even need to adjust the jack from the old wheel to the new. Pulled the axle setup off a burnt 450m
Edited by Supa Dexta 7/25/2024 08:48
 (20240725_102705(full) (full).jpg)
Attachments
----------------
 20240725_102705(full) (full).jpg (99KB - 65 downloads)
| |
|
New Boots for baler
