|
| Fair enough. Totally get it if it isn't a common situation to spray into.
Depending on nozzle size of the AIXR that you are using, if you can set the water volume/rate such that you are spraying in the upper 60PSI+, it'll start to get fine enough for fungicide. In a chart, that'd be the sweat spot where you are just tip-toeing into the Coarse spray quality from the MEDIUM spray quality.
So, guessing that is where you were at around the 18-19GPA @60-65PSI, so glad you got it sorted. Thats what I would have done to use what you have | |
|
Water volume applying fungicide on soybeans
