Posted 8/15/2024 11:42 (#10852180 - in reply to #10852109) Subject: RE: Spreading Grass Seed T40
near Mtl, QC
Another thing is I used the small disk and found out that even with calibration you have to check lbs/acre applied. In my case for 10#/a I have to set it to 7.5/8.
Also speed was set that the opening gate was is the 50-55% open range. At 75%+ the rate is way too much. I suppose it have to do with the raygrass seed shape.
Spreading Grass Seed T40
