|
Sioux County, NWIA | Your post brings back memories of when we added a factory NH processor to a NH 900. Definitely a different product than what we were used to.
Depending on if you have enough (too much) power in front of the chopper, you may hear the processor start to chatter if it the chopper is being pushed hard. I would avoid pushing that hard as the chatter is coming from the rolls pushing apart a little bit against the springs and hammering back against the stops. Probably not the best for the processor, and probably hurts the processing quality. Your mileage may vary if it is not a NH processor. | |
|
Length of chop and ground speed
