|
Jeffersonville, OH | So, here's what I have to say...you're not going to make most things Deere work without a Deere display in the cab. Then, without having a "bridge" between the Deere display, and the tractor, you're not going to have anything that functions other than Deere machine control...ie, your autosteer will not function through the Deere screen.
AGCO has a harness, part AG430171, that allows you to just install a Deere display into the cab for ISO control of Deere implements through a Deere display. Then, you would still use the AGCO display for steering and guidance.
If you want to go full Deere, with a Starfire globe on the roof and use Deere for steering and everything, then I would recommend the Reichardt GreenFit kit. I have installed about 20 of them in AGCO and Versatile products, and most installs go seamlessly. On the off chance you ever need anything later, their service is absolutely wonderful. I have had some systems in the field for over 10 years, and we have needed a few things, software updates, wiring getting chewed up, etc...and they are absolutely awesome to work with.
I have used another Deere Bridge manufacturer a couple times, and I have gotten basically ZERO support from then both times when I couldn't get the bridge working out of the box.
Now, my experience with ISO is that if the machine is ACTUALLY ISO compatible, everything is great...but Deere is RARELY actually ISO compatible, and you have to have a Deere display to make it work. Deere's tillage control system for some reason needs a valve installed for other brand tractors to function properly from what I've seen, so I HIGHLY doubt that the electronics would be any different
Chris | |
|
JD ISO implements & Agco tractors?
