|
East Central, Nebraska | you might be overthinking it. if you have an ag leader iso kit just move it from tractor to tractor. the iso part only entails what i remember to be maybe a 4 pin plug and main power ran into an iso plug. in the ag leader kit the plug is mounted in a steel square box. its not all that complicated. you could maybe run power to the back of the tractor for each plug and maybe if completely necessary make a cord extension to plug into the display cable that runs to the back of the tractor. everybody always runs to agexpress for harnessing solutions and they typically don't do 10% of the stuff people think they do. if your slightly handy around the shop and know what the + and - mean on a battery you can likely handle it. if you need some help i could maybe make a cable if need be. email is in profile.
| |
|
Raven ISO to Incommand on a non-ISO tractor
