|
NW Minnesota | Bump....I can't believe I am the only one having issue with this. Have confirmed with retailer and DJI that this function is not working properly in the current firmware. Nobody else flying multiple T40's in the same field? Segments don't transfer from one remote to the other when the field is downloaded to the second remote. Segments change when you move the trailer "remote" across the field to start the next set of segments. Almost every time there is a swath left unsprayed between the segments.....You don't know it because the coverage is not shared across the remotes. You'll only see it on the phone app once the missions are all complete and upload has hopefully happened to the app and the whole field coverage is shown. Or you'll see it the next morning after spraying desiccant as green streaks 26' (5' +/-) in the field. | |
|
T40 Route Segment Transfer
