Northern Indiana | StarFire power on time after key off was designed to hold signal accuracy while operators stepped away from machines (lunch/dinner, run a different machine for a while, etc etc)
Many operators were leaving engines idle to maintain GPS accuracy until this setting was offered
Signal accuracy used to take much longer to build up to 100% on older hardware such as Original/iTC StarFire models
GPS software and hardware has drastically improved the last 20 years
white caddy - 12/30/2024 07:37
So why do these need to be left on after the key shuts off? After the receiver shuts down does it take a long time to reboot and figure out where its at? |
Greenstar 6000 hours
