|
Jeffersonville, OH | Yes, you could absolutely make it a simpler install with some quick disconnects...but I would be looking more at what the Loftness spreader needs for high current power, and then see if there's any way I had enough power outlets in my tractor cabs to pull keyed and constant power from them.
Doing that, I could build a quick harness with a couple relays and an ISO connector that you could swap very quickly.
Not directed at you at all, you're very sharp, but a LOT of folks make ISO a LOT harder than it actually is.
Chris
EDIT: Actually, I could take the harness he needs out of my 340 Versatile and send it to him. Took me about 45 minutes to repurpose a AGCO Baler harness and re-pin it to a 30A AMP Power connector in the cab, and to the Ag Leader harness.
Edited by c_mayer 12/30/2024 13:18
| |
|
Raven ISO to Incommand on a non-ISO tractor
