Middlesex County, Ontario | In that box is an Arduino nano, Cytron MD13S motor driver, an ArduSimple F9P GPS board, an IMU to sense/correct for tractor tilt, and a circuit board with some basic circuits (power regulation) to hold it all together neatly.
Some of the other board designs (AIO - All In One) are designed to fit inside an aluminum Hammond box, and there's a PCB design that's just FR4 and silkscreen to act as a faceplate for the box. Some of the smaller board designs that are CANBUS only are designed to fit in a plastic ECU type of enclosure.
One of my boxes below.
Edited by WildBuckwheat 12/31/2024 08:50
 (camphoto_959030623 (full).jpeg)
Attachments
----------------
 camphoto_959030623 (full).jpeg (182KB - 1 downloads)
|
AgOpenGPS - Really cheap autosteer
