|
Indiana | I am wanting to use 4 clutches to control 4 sections of three rows on a white 6180 12 row. This planter has the transmissions located in the center of each wing meaning there are 3 units on each side of two transmissions. If I can find a clutch (like the tru count) that is narrow enough to fit between the row unit and the transmission then I can have 4x 3 row sections on this planter with only 4 clutches. The planter has white air meters on it which turn very easy and I suspect three of them will be no where near the max of these clutches. | |
|
Trimble/Tru Count row clutch operating torque
