|
NW Ohio | Depends on your units for the spreader constant. If they are the same as the Raven RCM spreader constant, it is in pulses per cubic foot. Then to get to cubic ft per revolution (CFR), you would just take 180 counts/rev divided by 823 counts/ft^3. I come up with 0.219 cubic feet per revolution.
Another way to figure it out would be to calculate it off of your gate opening. Measure how wide your gate opening is times your gate height times the circumfrance of your rear sprocket and that will come out to your cubic inches per revolution. Then divide by 1728 cubic inches per cubic ft to get to your CFR.
Hope this helps! | |
|
Chandler Spreader Constant to AgLeader CFR
