|
Minnesota | You can download the manuals for Row Flow from the Precision Planting website.
The Row Flow modules can get power through the 20/20 harness OR it could be set up with a separate power feed directly to the Row Flow module. If you look at the Row Flow module, there should be a big harness with a few connectors coming out for various functions. One of those should be the 12v power supply. It's a 2 pin weatherpack connector. You have to have 12v into that plug. There should be a green light on the Row Flow module.
It's been a few years since I ran Row Flow, but I do remember running a power wire back to the Row Flow module. I don't remember what the 12v. connector on the RF module plugs into if you don't have a dedicated power supply.... You should download and read the installation manual for RowFlow. It will also tell you how to run the Health Checks if you're not familiar with Precision Planting.
I don't have a JD planter, so I can't help you with whatever else you might need the ISO might be needed.
Edited by chris dds 1/4/2025 12:09
| |
|
Precision row flow/ isobus
