Posted 1/5/2025 08:21 (#11041787 - in reply to #11040716) Subject: RE: Trimble/Tru Count row clutch operating torque
NC KS
Look identical but the width is different. My mistake.
To the OP
I doubt if a Trimble air clutch or electric clutch will pull 3 rows. Buy a set of used ones and put them on every row or setup a jackshaft so you can use the more common fatter clutch. The 8500 series had a jackshaft drive and that is how they used that fatter clutch.
Trimble/Tru Count row clutch operating torque
