|
Hennepin, IL | Yes if you want supported cabling. You can just use it to go to Port b on the receiver cable as mentioned. You can also get terrain compensated signal from the controller, whichever Steercommand it is. That plug is a 4 pin deutsch on the Steercommand main cable. That takes an adapter from AL to go from that 4 pin to a 9 pin serial. I've just made a cable to go from that one to the 4 pin AMP on the 20/20 harness, essentially eliminating the 9pin serial completely. | |
|
Precision planting 20/20 to ag leader gps cable
