Middlesex County, Ontario | DKC101 - 1/5/2025 12:06
Also not ruling out installing a JobCom and going Trimble 500/CFX750/FMX route. Just don't know price, availability, or the installation of a JobCom.
It been a bunch of years, but if I recall the JobCom PCB kit was between $1000 and $2000 and was simple to DIY install in an hour. The VRA unlock for the CFX750 was $750. Probably add a couple hundred bucks more for the wiring harness (serial cable from CFX to HC5500). |
Automatic section control for HC5500 w/out JobCom
