|
| Got a JD 7000 planter 8rn late last spring. Got it fixed enough to get through last year. We've got it in the shop and have it all torn down and are ready to put it back together. Drive shafts and drive line bearings were all pretty bad. Found a 7200 transmission, pretty cheap so we're going to switch it over to 7200 drives. What problems am I going to run into? The drive shafts are bigger on the 7200 so will the 7200 bearings fit on the 7000 frame? Any other advice while we're doing this?
Thanks, Greg | |
|