|
West Texas | What size tips?
I'm currently running TeeJet AI 11002 tips, 20 mph at around 70-75 lbs of pressure. Not sure what I get at 15 mph, don't run that slow. lol
What kind of problems are you having?
Over-applying? Under?
If you are running the inline boom strainer you may be showing pressure at the sensor but are not actually getting that pressure at the tips.
The strainers restrict the flow too much!
A while back I had a valve acting up while putting out some Millers triple 20. The granules would not dissolve good and got stuck in the eductor/bypass valve. Ended up replacing both valve and actuator.
But while it was going out I was getting eratic pressure readings, sometimes no flow according to the monitor even though I could see good pressure at the tips. And it would lose pressure while going thru the field. | |
|
Spray pressure
