|
sw corner ia. | grinding the edge of the cross auger on your table square with a hand grinder.
Your fountain auger may be worn sharp so when the beans get around it while the extension is pretty full, it will turn your beans to meal. If you have some flighting left to weld to and the edge is just sharp, you can add a 1/4" or 3/8" rod around the edge of the flighting and your damage will drop dramatically, also the auger will last many times longer. here is a picture of what I did to every auger on my machine..
 (auger flighting fix.JPG)
Attachments
----------------
 auger flighting fix.JPG (48KB - 92 downloads)
| |
|
started cutting beans today
