|
Northern Illinois | Ernest has it right. You need to have version 2.4 loaded on the Envisio Plus already. You do not have to hook anything else up to the antenna. I did a few of them that way, before the Envisio upgrade, but it's not necessary any more.
From the "Home Page," touch the "GPS" icon. I forget the next choices exactly, but there's a way to manually program a satellite number. I started setting them on "Auto-Detect," but that didn't work as well as when I programmed in #135. After entering the number, it may take 4-5 minutes for the receiver to pick up the signal. I was a little to impatient to start with. | |
|