|
cropsey, il 61731 | Good points. The motor would be turning a considerably larger wheel (46" vs 28") so it's rpm would be less, but my main concern was over speeding the bearings (a common problem on sprayers so I'm told). I have plenty of pump for the additional displacement, but don't really want more than 1100cc/wheel revolution (either direct or through a planetary) because to much power will cause the front wheels to spin out. If there isn't any significant speed restrictions (ie combines with rear assist only can go 10mph), these motors might be ideal.
Thanks, Pat | |
|
Combine rear assist wheel motors
