Posted 1/18/2008 09:17 (#286100 - in reply to #285265) Subject: Re: GPS out of Ez-Guide 500/autonomous gps for autospray
roaming
Art - why are the ports on the EZ-Guide Plus and the EZ-Guide 500 pinned differently?? The EZ-Guide Plus is nulled (2 is Tx, 3 is Rx), but the EZ 500 appears to be standard (2 is Rx, 3 is Tx). I've contacted Trimble support about this, but they were not able to tell me why, or even to confirm that this is or isn't true...