|
| You are partially correct CB, but if you have a normal working display (even a GS2) with no fault codes showing on the CAN then you are in working order. If the display doesn't say Deere ISO 4/5 or 2.5 on the back it is probably a 4/5 CAN Display. If you plug it in and no errors come up, it is obviously a 2.5 CAN that is in working order. Then if you go to INFO, Greenstar Display, CAN Layer and it selects either Auto or 2.5, you are good. If you cannot select Auto or 2.5 and it keeps beeping at you, you have a 4/5 display. | |
|