|
NEIA | I will have to go along with checking your distance cal. I had the same thing with mine and thought the speed cal was right as I had 3 speed readouts in cab(tractor dash, gps,& raven). Mine would always apply 5 to 10 lbs to much and after checking everything a couple of times went out and measured out a couple hundred feet. Found I was off by 10 feet over a 400 foot course. May seem like a small amount, but it was enough to throw my rate off. Now it is within 1 to 2lbs. | |
|
Raven Acuflow problem revisited...Today...
