|
Central Iowa | I am going to guess that a 2005 head would be similar to our 2004, this service bulletin is dated 11/8/2005. The Gleaner part number for the kit is 71407243. It seems to me that someone at Agco could get you set up with a Challenger number or Massey number. We don't have this one installed yet, but it looks like a good setup to me. It gives a similar adjustment to the 500 series head. We never had drive belt adjsutment problems with the 500 head. When the shock absorber goes bad (they call it a damper) it can give you fits, however. | |
|
Seppie---in case you don't see this on prev.post.
