|
South East Illinois | I don't have any pictures but I will try and explain what I did. I mad my own, I couldn't see the price in what JD had. I used 2 pieces of 1/4" X 1" flat bar stock. I seprated them enough to put a 1/4" bolt between them. I took the screws from the window lock outs and added a short piece of flat stock. Then welded it to the two piceces of flat so they run between the window post on the right window. Man that sounds confusing. I can try and get some picts.
Edited by Little Duck 2/11/2014 11:21
| |
|