|
SW KS, near Dodge City | To take it apart tomorrow. What I can't figure out though is the pressure that the pump is putting out then. I don't know how much pressure it takes to hold a 20' grain bed in the air with a full load of wheat, but it'll do it. That would have to be one heeeeaaavy duty pressure relief valve. And that would mean that the pump can create a pretty impressive amount of pressure.
I don't think there's one there, just to much liability/chance for a horrible accident if it let go when the bed was in the air.
Maybe they welded the fitting on the tank and never drilled it out.
Phil | |
|
Truck hydraulics again... Now several Pics. Can anybody explain this?
