Viewing a thread - JD 7720 Repair ?

Forums | Classifieds (4) | Skins | Language

You are logged in as a guest. ( logon | register )

JD 7720 Repair ?	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

Paul(WI)

Posted 9/6/2006 21:27 (#41919 - in reply to #41906)
Subject: RE: JD 7720 Repair ?

I repaired our 6620 a couple years ago. The worm gears were not fully engaging. I just took a piece of 1/4" x 4" flat iron, cut out the proper size hole and welded it to the plate.

JD 7720 Repair ? - BRIAN : 9/6/2006 20:43
- RE: JD 7720 Repair ? - Paul(WI) : 9/6/2006 21:27
- RE: JD 7720 Repair ? - Hawken Cougar : 9/6/2006 21:38
  - RE: JD 7720 Repair ? - BRIAN : 9/6/2006 21:50
    - RE: JD 7720 Repair ? - Hawken Cougar : 9/6/2006 22:01
      - RE: JD 7720 Repair ? - BRIAN : 9/6/2006 22:05
    - RE: JD 7720 Repair ? - Hawken Cougar : 9/6/2006 22:15
    - Re: JD 7720 Repair ? - Kevin NC IA : 9/7/2006 08:29
      - Re: JD 7720 Repair ? - don@ nebr. : 9/7/2006 11:21
- RE: JD 7720 Repair ? - jdg : 9/6/2006 23:06
- Got R' Done - BRIAN : 9/7/2006 19:42
  - RE: Got R' Done - dave swia : 9/7/2006 21:09

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)