|
| D-J's Land Manager (not the Land Manager SE) is vrt ready and far less money than a 660 Raven. I use the Land Manager II on spinners boxes and use the second channel to directly control spinner RPM. These controllers can use any PWM hyd valve and work good. A 30 gpm Brand EFC valve will cost less than $300 if you buy it right. A D-J 30 gpm servo valve will set you back about $2000 ! This is the valve you need for the 100 series D-J controllers. There is no limit on rate, as far as the Land Manager is concerned. If you want to go this way and admit to being cheap, I can tell you where to buy at a small discount. You are not going to get much help from a dealer, I think their cut is lower than normal, but D-J's phone support is good. | |
|
Dry spreader controller ?
