|
Effingham, IL | I put one on my Unverferth last year. The guys at Scale-tech were very helpful. I was impressed that my cart came from the factory with the holes and conduit to run the wires. The front hitch used to pivot but now is ridged, but there is plenty of room with the clevis hitch. It is my understanding that the reason you have to be stopped to get an accurate weight is because it gets it's reading from the amount bend in the spindles. For me weighing in a ditch also throws off the accuracy, so we write down weights before we pull over to unload on the edge of the road. Craig | |
|