Viewing a thread - Educate me in Drill Bits

Forums | Classifieds (33) | Skins | Language

You are logged in as a guest. ( logon | register )

Educate me in Drill Bits	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

Adrian

Posted 9/14/2006 07:47 (#43668 - in reply to #43599)
Subject: Re: Educate me in Drill Bits...DeWalt problem

South Georgia

"The centering point type..." You mean the ones with the little point on the end? I guess you could grind it off, then sharpen it to have a regular bit. Yeah, it wouldn't be self-centering anymore, but at least you wouldn't have to throw away the bit.

Adrian

Educate me in Drill Bits - jcs : 9/13/2006 15:57
- RE: Educate me in Drill Bits - pbutler : 9/13/2006 17:18
  - Re: Educate me in Drill Bits - Adrian : 9/13/2006 17:27
    - Re: Educate me in Drill Bits - kurt : 9/13/2006 22:29
    - Ditto on the Drill Doctor - NVDave : 9/14/2006 00:22
- RE: Educate me in Drill Bits - Hawken Cougar : 9/13/2006 19:10
- Re: Educate me in Drill Bits - JohnW : 9/13/2006 19:31
  - Re: Educate me in Drill Bits...DeWalt problem - Ron..NE ILL..10/48 : 9/13/2006 22:44
    - Re: Educate me in Drill Bits...DeWalt problem - Adrian : 9/14/2006 07:47
      - Re: Ditto - Tim KS : 9/14/2006 10:01
      - Re: Educate me in Drill Bits...DeWalt problem...again - Ron..NE ILL..10/48 : 9/14/2006 19:17
        
        Re: You can always.... - Tim KS : 9/14/2006 21:10
        
        Re: Educate me in Drill Bits - Adrian : 9/14/2006 21:43
- Possibly cooked your own goose - Franz© : 9/13/2006 20:45
- Question......... - Ham : 9/13/2006 21:02
  - Re: Educate me in Drill Bits - boog : 9/13/2006 22:59
- RE: Educate me in Drill Bits - Jules : 9/13/2006 21:48
- RE: Thanks - jcs : 9/14/2006 09:42
  - Re: Educate me in Drill Bits - Jon Hagen : 9/14/2006 14:12
    - Re: Educate me in Drill Bits - pbutler : 9/14/2006 14:29
    - Re: Educate me in Drill Bits - jcs : 9/14/2006 14:31
    - Re: Educate me in Drill Bits - Jack G : 9/14/2006 21:01
    - Good to hear - Tim in WI : 9/14/2006 21:11

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)