|
NE SD | I would NOT recommend chippping an 84x0 or 85x0. Reason beings that you are starting to reach the outer limits of that motor. If I had to I wouldn't go more than about 10%.......8520 should be around 310 engine hp. Highes that 8.1L motor was ever rated was 340hp. Now the 30 series are a completely different animal......I would guess that noone is even near to having a chip out for that 9.0L motor yet.
If you're needing that much power you need more tractor, go buy a 9220 for less money and have an appropriate sized tractor for the job you are doing.
Edited by Chad H 9/15/2006 12:18
| |
|
Chips for 20 or 30 series
