Viewing a thread - Plowboy on wood blocks

Forums | Classifieds (104) | Skins | Language

You are logged in as a guest. ( logon | register )

Plowboy on wood blocks	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

Posted 9/19/2006 23:02 (#45089 - in reply to #45078)
Subject: RE: Plowboy on wood blocks

nw pa

why not sandwich the wood between the two outer rings?? Should be twice as good as one in the center.

Top of the page

Bottom of the page

Plowboy on wood blocks - bulldog : 9/19/2006 22:35
- RE: Plowboy on wood blocks - sri : 9/19/2006 23:02
  - RE: Plowboy on wood blocks - plowboy : 9/19/2006 23:42
    - RE: Plowboy on wood blocks - bkandra : 9/20/2006 07:23
- We just put them on a 9610 - BHTN : 9/20/2006 09:20
  - RE: We just put them on a 9610 - bulldog : 9/20/2006 13:43
    - We thought the same thing - BHTN : 9/20/2006 16:40
      - RE: We thought the same thing - bulldog : 9/20/2006 22:21
        
        Re: Plowboy on wood blocks - Rosco : 9/21/2006 00:04
        
        Re: Plowboy on wood blocks - Chad H : 9/21/2006 00:13
        
        Does your book say 10 hours? - BHTN : 9/21/2006 07:51
        RE: Must be a corn thing - plowboy : 9/21/2006 09:40
        
        Re: Plowboy on wood blocks - plowboy : 9/21/2006 00:32
        
        I agree - BHTN : 9/21/2006 07:53
        
        Re: Plowboy on wood blocks - Clapodie : 9/21/2006 09:30
        
        so how do you get the center two in? - dave swia : 9/21/2006 14:02
        
        yes sir, that was what I wondered - dave swia : 9/22/2006 08:01

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)