Viewing a thread - Follow-up question on Case tractors

Forums | Classifieds (110) | Skins | Language

You are logged in as a guest. ( logon | register )

Follow-up question on Case tractors	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

RICK NCMD

Posted 9/20/2006 23:23 (#45322 - in reply to #45276)
Subject: Re: Follow-up question on Case tractors

Gotta be careful putting the clutch assemblies on the shafts. If it aint done right, it will go in reverse when its not supposed to. Some of the early trans had steel sealing rings, everything now is teflon with those cute little intnerlocking ends.

Follow-up question on Case tractors - Tom Russell : 9/19/2006 13:08
- RE: Follow-up question on Case tractors - RICK NCMD : 9/19/2006 13:22
  - What Do You Mean? - Marv : 9/19/2006 16:37
    - RE: What Do You Mean? - RICK NCMD : 9/19/2006 23:02
      - Re: Follow-up question on Case tractors - Tom Russell : 9/20/2006 06:13
        
        Re: Follow-up question on Case tractors - RICK NCMD : 9/20/2006 20:05
        
        Re: Follow-up question on Case tractors - pudding : 9/20/2006 20:35
        
        Re: Follow-up question on Case tractors - RICK NCMD : 9/20/2006 23:23
        
        Re: Follow-up question on Case tractors - Tom Russell : 9/21/2006 06:38
- RE: Follow-up question on Case tractors - chris dds : 9/19/2006 16:47
  - Re: Follow-up question on Case tractors - Tom Russell : 9/20/2006 06:16
- RE: Follow-up question on Case tractors - dave morgan : 9/20/2006 00:16
  - Re: Follow-up question on Case tractors - Tom Russell : 9/20/2006 06:23
    - Re: Old Buicks - Redman : 9/20/2006 13:58

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)