|
Southeast Florida | The problem is all of the complicated wiring under the cab and around the engine is bad. The engine ECU is bad from the wiring harness being bad. Right now with the wiring harness @ $2600, and remove the cab to get to it the estimated repair bill is going to be $12,500 so far. Now the horizontal shaft between the front half and back half is bad also. Deere has had such a problem with this that they now offer a kit using the old parts plus $3,500 in new parts. Getting somebody to work on the tractor in Hawaii is the other problem.
The local dealer is pitiful. They diagnosed an old 7520 articulator as having a bad turbo and the real problem was the main bearing between #2 & #3 had spun causing the loss in power.
| |
|
Kenzie Repower on 9400
