Here are some pictures of ours. Nothing pretty but they certainly get the heads to the fields. I agree that the support under the cutterbar needs to be as long as the head is wide. We have some with poles and some with pipe, both work fine but personally I prefer the pole. I'm told the pipe 'looks better'. It's a bit of a tradeoff between lenghtening the reach and lenghtening the tongue, you need to do some of both but not too much of either one.
Edited by plowboy 9/22/2006 23:36
 (head trailer2.JPG)
 (Head trailer.JPG)
 (headtrailer3.jpg)
Attachments
----------------
 head trailer2.JPG (86KB - 387 downloads)
Head trailer.JPG (91KB - 397 downloads)
headtrailer3.jpg (98KB - 368 downloads)
| 
Make a head mover
