|
| When I used to sell equipment and had to tow Fargo and Gehl dump boxes on the hiways over 40 miles I would run a chain from one front wheel spindle to the other side, taking the chain thru the tongue ( where hitch pin goes in ). When I got in on the road, I would take a chain binder and take the slack out of chain, not too tight, but just enough to tighten everything up. I could then tow the boxes at 60 mph. or better. But you have to release binder to make a tight turn.
I always thought I could try and use a cable with a heavy spring to do the same , but allow you to turn without unhooking anything. | |
|
Make a head mover
