|
NorthCentral Illinois | I had to replace the one in the back closest to the grain on the bottom gearbox about the 3rd I had it going on 10 years now. Without looking at it I remember taking the bolts out of the shaft that holds the main auger and the bolt out of the shaft that holds the knuckle do not remember much beyond that. When I put it back together I put corn head grease in the gearbox find a zerk that fits one of the plugs on the side take the other plug out and pump away until the grease comes out the hole. Been doing that every year since and haven't had any problems. | |
|
Mayrath swingaway auger gearbox?
